nanard289
Fri December 30, 2011 1:35pm
Rating: 10
|
Building operation - second step
here I cut a 90° aluminum pipe elbow to have two small 40° elbow. This will allow to have a vertical 5° angle
|
|
nanard289
Fri December 30, 2011 1:41pm
Rating: 10
|
Step 3
A piece of wood is used as dummy to adapt the round pipe at the head cylinder flange opening
|
|
nanard289
Fri December 30, 2011 1:45pm
Rating: 10
|
Step 4
Now we have to connect carefully elbows in the flanges and to bing it to the welder
|
|
nanard289
Fri December 30, 2011 1:55pm
|
Step 5
Welding operation is completed, now we have to adjust both intake manifold ports to the head cylinder
|
|
nanard289
Fri December 30, 2011 2:03pm
Rating: 10
|
Step 6
Weber carbs need some clearances in the flange to allow free operating movements
|
|
nanard289
Fri December 30, 2011 2:23pm
Rating: 9
|
Carbs front view
In this picture, we can see the vertical angle of 5°. In this position, we have to decrease by 1mm fuel bowl level in the carbs
|
|
nanard289
Fri December 30, 2011 2:35pm
Rating: 9.75
|
Step 7
Building operations are completed. Now is the time to tune the carbs. I had previously a set of Weber 48IDF and I have change to adapt a set of 48 IDA bored at 50mm
|
|
jonalley
Wed October 31, 2012 2:14pm
Rating: 10
|
|
Pete Munroe
Sat May 11, 2013 11:34am
|
modified Weiand Stealth manifold
|
|
Pete Munroe
Sat May 11, 2013 12:14pm
|
Notching a Weiand Stealth manifold like Edelbrock Air-Gap
My "home made" Bridgeport Mill...well, have a milling bit anyway...took a while to figure out how to feed the work so the bit wouldn't chatter. First pass the bottom was uneven. Second pass rigged up a better support and got the notch parallel to the carb pad.
|
|
Cobra #3170
Tue December 17, 2013 4:14pm
Rating: 10
|
exhaust manifolds
cast iron manifolds
|
|
Earl J
Mon April 14, 2014 2:03pm
Rating: 10
|
Weber Linkage on my 350 overview
I built this myself, utilizing the "as cast" bosses on the manifold. I designed the bell-crank on a special built block of steel. The linkage can be adjusted as it's design is progressive.
Simplicity at it's best, Rock solid
|
|
Gun Doc
Mon July 25, 2016 7:37pm
|
|
patrickt
Mon October 24, 2016 10:25am
|
|
Beejay
Wed December 20, 2017 1:55pm
Rating: 10
|
|
