Baz
Tue February 26, 2008 1:17am
Rating: 7
|
Dashboard cut out.
The dashboard has been cut out and is now at the trimmers.
|
|
gjkrv8
Tue October 14, 2008 8:50pm
|
Broken_Temp_sensor_thread_adapter
This little bugger gave me heart failure. it borke off in the block. Had to use an "easyoout" to get it out. Though I might have had to take the whole engine out.
|
|
n6opv
Mon January 19, 2009 11:25pm
|
Arntz / Butler door
This is the final version of the Arntz / Butler door. The inner and outer fibreglass panels conceal a 2 x 4 x 0.120 wall steel tube for crash protection and rigidity. A VW door latch, striker and handle let you in and out. A plate is welded on the front, to which the hinges bolt and adjust. The hinges are press formed from 1.5 x 0.5 solid steel bar and swing on delrin bushes. Unique to the Arntz Type 4 are the Mercedes door pin and socket (just above the latch) that solidly ties the door to the rest of the cage surrounding the passenger compartment.
|
|
kitcarbp
Fri February 27, 2009 8:45am
Rating: 10
|
Edelbrock Fuel Pump Curve for my 1791 street-duty pump
Taken from the Edelbrock Web-Site, check it out.
|
|
TWOOD
Sun September 13, 2009 2:00pm
Rating: 10
|
Two sizes used
Smaller dia. bulb "splices" into the larger bulb by slipping into the ID. Should help to keep the water out.
|
|
wicked fast
Tue October 13, 2009 10:32am
Rating: 10
|
cc_9028_1126109956992_1354451164_328892_4000146_n
At a recent car show..when it was still warm out.
|
|
jcraigau
Mon December 28, 2009 8:39pm
|
Jag 4 pot front brake pistons
That should buff right out...
|
|
FUNFER2
Sat February 6, 2010 5:41am
Rating: 10
|
Polished 304 stainless steel side pipes."Gilmore Kit"
Turn out. Notice how it slides between the muffler & muffler housing, for a nice tight & clean fit. Requires only a small tig weld. Use filler rod if you wish to smooth the weld.
|
|
FUNFER2
Sat February 6, 2010 5:46am
Rating: 10
|
Polished 304 stainless steel "Gilmore Kit". Finished.
Finished polished stainless steel side pipe. Cleaning is very easy with a quality polish. Much better than mild steel with a ceramic coating. These may last the life of the car. No glass pack to blow out. I use louvers instead. Look at the "muffler" photo.
|
|
Dangerous Doug
Mon April 26, 2010 9:26pm
Rating: 10
|
Me and Cameron pick up the ERA 289FIA
Freshly painted ERA 289FIA rolled out. Ken's did an outstanding job on the wet-looking gloss black.
|
|
fastraxsg
Mon October 4, 2010 7:23pm
Rating: 1
|
Inspection holes
Cut two holes in trunk tub to use for inspection holes, will make a double layer plug to fill them, bottom layer will fill the hole, top layer will over lap sides of hole to keep the weather out.
|
|
Z-linkCobra
Tue November 2, 2010 7:27am
|
Fan shroud
Got my fan shroud bent up and installed yesterday as well. No gotta close in the sides and finish it out.
|
|
jbcobra67
Sat January 1, 2011 2:01pm
Rating: 10
|
Headin out. Very good day.
Me, Eddie and Zach, in that order.
|
|
lal Naja
Sat August 6, 2011 1:57pm
|
Steering hub with locking plate installed.
The locking key is yet to be pulled out. left it in so you can see the works.
|
|
Dwight
Fri January 15, 2016 8:05am
Rating: 10
|
welding / grinding fire
welding / grinding fire. Working on metal ramps for the shop. I caught the grass on fire. We let it burn a couple of acres before we put it out. Shop grass looked great in the spring.
|
|
