
fkemmerer
Sun August 3, 2008 6:31pm Rating: 10
|
ERA 753 - Engine In and Mostly Hooked Up
Here's a picture of our ERA with the egine installed and everything hooked up except for the cooling system, the alternator, and the wiring for the EFI system.
|
|

kitcarbp
Wed September 23, 2009 9:42am Rating: 10
|
Cooling System Pressure Test Hose Connection
I tapped into the side of my expansion tank to check for potential cooling system leaks with 10-15 psi shop air.
|
|

Merv and Sharon
Fri October 16, 2009 10:32pm
|
|

Merv and Sharon
Fri October 16, 2009 10:32pm
|
|

*13*
Sun November 29, 2009 3:44pm Rating: 10
|
Napa 10764
Installed a makeshift bypass system for my Weber Manifold set up. Seems to have cured the cooling system ailments. Also, fuel was getting too warm. I cut oblong holes in the uprights for the fuel log. Seem to have cured that problem also. So much for that yard work today....
|
|

lovehamr
Sun July 24, 2011 7:03pm Rating: 10
|
|

lovehamr
Sun July 24, 2011 7:03pm Rating: 10
|
|

lovehamr
Sun July 24, 2011 7:03pm Rating: 10
|
|

lovehamr
Sat October 29, 2011 8:23am Rating: 10
|
Oil Thermostat
Oil Thermostat
|
|

lovehamr
Sat October 29, 2011 8:23am Rating: 10
|
Oil Thermostat
Oil Thermostat
|
|

nanard289
Sun January 29, 2012 11:52am Rating: 6
|
piston modification
I made one additional quench chanel on the piston to improve exhaust valve cooling (at the end of compression cycle) and to scavenge the combustion chamber (at TDC during exhaust cycle)
|
|

Cobra01
Tue April 8, 2014 1:37pm Rating: 10
|
|

Earl J
Mon April 14, 2014 2:03pm Rating: 10
|
R Model, Radiator (W-MO 6-22) & Oil Cooler
The cooling system for both oil and water are standard R Model (original pieces) also the Dayco race checkered race belt
|
|

Morris
Sat September 10, 2016 1:49pm
|
|

Morris
Wed October 24, 2018 2:28pm
|
|