Baz
Mon April 21, 2008 8:51pm
|
Gear_Selector_and_Handbrake_handle_to_match_steering_wheel_Small_
The shifter assembly, handbrake handle and radio/stereo surround were coloured in walnut. The particular shade of walnut had to match the timber colour in my wood rimmed steerring wheel perfectly, as I had the wheel prior to purchasing the other items.
|
|
donraye
Tue July 8, 2008 4:26pm
|
1966 Street Beast Cobra, Grabber Orange
This is the car in June 2008 before several recent changes were made. Additions included front and rear 12 way adjustable coil over conversions, custom upper and lower rear control arms with polyurethane bushings and upper rear Spherical Bearings, passenger side roll bar, 17" authentic Hallibrand wheels and Kuhmo tires, stainless heat shields on side pipes, custom grilles on all front oppenings, heavy duty oil cooler, LPS rear "Ultimate 8.8" differential cover, engine and firewall paint work to match exterior color, new orthopedic seats in grey leather, and other ninor changes. All work was done by me.
|
|
donraye
Tue October 14, 2008 5:17pm
|
New paint work and plug wires/looms. Done by me 10/08.
I decided to paint the Valve Covers and Air Cleaner to match the car. I then installed new polished wire looms and new yellow 8mm plug wires. Looks sharp I think.
|
|
52chevyred
Tue December 9, 2008 4:18pm
|
Powder Coated Calipers and Clutch Arm
I powdercoated my front calipers Argent Silver, to match the rear calipers. I did the clutch arm, because I could. 
|
|
DocDirk
Sat April 25, 2009 1:13pm
|
Auto Tranny vaccum origin
I put the auto tranny vacuum hose on this 1/8" vacuum outlet because it matches the modulator intake at the tranny - both are 1/8" size. Larger vacuum at the back of the carb I used for the brakes alone.
|
|
AlexCobra
Fri October 2, 2009 9:33am
Rating: 1
|
|
Z-linkCobra
Mon November 30, 2009 10:06am
|
Parking brake handle to match the shifter.
|
|
Z-linkCobra
Mon December 14, 2009 6:10am
|
Driver side inner door
This is the proposed pattern I am thinking about. The blue part will painted to match the car...the black will be carpeted to match the floor.
|
|
Z-linkCobra
Mon December 14, 2009 6:10am
|
passenger side inner door
This a different proposed pattern I am considering. Again the black will carpeted to match the floor and the blue would be painted to match the car.
|
|
Wbulk
Fri June 25, 2010 3:14pm
Rating: 10
|
Port Matching Edelbrock Intake to Heads
This is showing the area where aluminum has to be removed from the intake to match the ports on the heads.
|
|
Beastly
Mon February 13, 2012 2:24pm
|
pass side
crazy difficult to get curvatures to match
|
|
Beastly
Mon February 13, 2012 2:24pm
|
|
Wazza
Mon December 10, 2012 8:03pm
|
Instrument Panel
Made with craft wood...painted to match the stripe...then lots of clear.
|
|
Biruta619
Thu June 12, 2014 2:38pm
|
Interior
With matching helmet
|
|
Mike Stone
Tue August 9, 2022 6:44am
|
New Hood
Aluminum Hood with matching colour
|
|
