 
Main Menu
|
|
Nevada Classics
|
|
Advertise at CC
|
| S |
M |
T |
W |
T |
F |
S |
| |
|
|
|
1 |
2 |
3 |
| 4 |
5 |
6 |
7 |
8 |
9 |
10 |
| 11 |
12 |
13 |
14 |
15 |
16 |
17 |
| 18 |
19 |
20 |
21 |
22 |
23 |
24 |
| 25 |
26 |
27 |
28 |
29 |
30 |
31 |
|
|
CC Advertisers
|
|
|
6 result(s) to your search. (stroke,)
|
·
|
|
buildride
Thu March 1, 2007 11:55pm
|
1967 427 S.C. Cobra Viper Blue
1967 427 S.C. Cobra Viper Blue.Smeding 427 Cobra Special. Bored and stroked to 427 cu.in., 450hp 450ft lbs est., 10.2:1 comp. 351 SVO Sportsman II block 4.030” bore, 4340 forged crank 4.170” stroke, forged pistons floating pin, 4340 steel H beam rods 7/16 ARP bolts, engine balanced to ½ gram, roller cam .493/.510 lift 279/289 dur, Edelbrock Performer RPM aluminum heads 2.02/1.60 SS valves springs single w/damper, dual roller timing chain, aluminum roller rockers 1.6 ratio, Intake Edelbrock aluminum performer, Holley 600 four barrel, HEI dist, March serpentine billet aluminum pulley set.
|
|
Anthony
Wed April 4, 2007 7:54pm
Rating: 10
|
Chassis Dyno - Initial Run 427 High Riser
Self built 427 SO, stock stroke, 429 ci., Dove aluminum High Rsier heads, mildly ported, 10.5 : 1 CR, original holley 780 cfm LeMans carb, vacuum secondary, on an original single four BBL Hi-Riser intake. Chassis Dyno is at Performance Engineering, Hamilton, OH.
Initial run with engine as built by me, with jetting as supplied with carburetor.
|
|
Anthony
Wed April 4, 2007 7:55pm
Rating: 10
|
Chassis Dyno - Last Run 427 High Riser
Self built 427 SO, stock stroke, 429 ci., Dove aluminum High Riser heads, mildly ported, 10.5 : 1 CR, original holley 780 cfm LeMans carb, vacuum secondary, on an original single four BBL , dual plane, Hi-Riser intake. Chassis Dyno is at Performance Engineering, Hamilton, OH.
Carb jets changed, and timing adjusted by Performance Engineering. Picked up 80 ft-lbs torque and 60 hp by chassis dyno tuning.
With a 20% loss, estimated max flywheel torque is about 600, with about 570 flywheel HP at 5900 rpm's and still climbing.
The torque curve is pretty flat.
|
|
Anthony
Wed April 4, 2007 7:57pm
|
Chassis Dyno - Last Run 427 Hi-Riser Air-Fuel Ratio
Self built 427 SO, stock stroke, 429 ci., Dove aluminum High Riser heads, mildly ported, 10.5 : 1 CR, original holley 780 cfm LeMans carb, vacuum secondary, on an original single four BBL , dual plane, Hi-Riser intake. Chassis Dyno is at Performance Engineering, Hamilton, OH.
Carb jets changed, and timing adjusted by Performance Engineering. Picked up 80 ft-lbs torque and 60 hp by chassis dyno tuning.
With a 20% loss, estimated max flywheel torque is about 600, with about 570 flywheel HP at 5900 rpm's and still climbing.
|
|
cobrajam
Sun November 18, 2007 6:06pm
|
391 FT Steel Crank
knife edged and lightened, went from 75lbs to 65lbs, 3.78in stroke, .010/.010, machined snout and flywheel face to fit FE
|
|
D-CEL
Mon April 21, 2008 4:04pm
|
Sonny Bryant big block crank
custom Sonny Bryant forged, 4.250 stroke, 351 mains, boss 429 snout, 460 crank
|
|
|
All times are GMT -7. The time now is 08:53 AM.
Links monetized by VigLink |
