FunariB
Mon June 7, 2004 12:47pm
Rating: 10
|
1966_Cobra_09
ERA Replica with 427 Cammer motor and Weber throttle bodies.
|
|
Anthony
Sat August 7, 2004 11:51am
Rating: 10
|
1960's Tecalemit-Jackson fuel injection system for road racing
This fuel injection system was developed in England in the 1960's, primarily aimed at road racing, as opposed to Hilborn/Algon which was more for drag racing. Tecalemit-Jackson apparently had a better partial throttle metering system for road racing, but because it was a continuous flow/low pressure, it didn't develop the max power as good as the Lucas - high pressure sequential fuel injection system that had better fuel atomization, more power. None the less, it still was used, and I heard it was at least tested in GT40's. Holman-Moody was the US distributor. The throttle bodies were based off of the weber 48 IDA, and could be bolted on any weber 48IDA intake, each throttle body separately.
|
|
Dennis Mosley
Fri January 14, 2005 4:52pm
|
stack side view
stack system from very coo parts before the intake and throttle bodies are polished
|
|
RobV
Sun June 12, 2005 7:55pm
|
Byran holding class
Bryan explains how the bodies are manufactured and the fiberglass molds work.
|
|
Eljaro
Sun March 19, 2006 9:55am
Rating: 10
|
Weber 48 IDA on 427 C/O
polished carb bodies, all polished stainless steel fasteners, gold spun aluminum stacks.
|
|
Philm
Tue April 11, 2006 8:12pm
Rating: 10
|
Throttle bodies
Mock up throttle bodies
|
|
mj_duell
Thu July 13, 2006 1:53am
|
Huge trunk in the New EVO 4 bodies
Huge trunk in the New EVO 4 bodies. This is done by making the EVO chassis IRS only at no extra charge. This probably one of the largest trunks in the industry.
|
|
mj_duell
Thu July 13, 2006 1:53am
|
Huge trunk in the New EVO 4 bodies
Huge trunk in the New EVO 4 bodies. This is done by making the EVO chassis IRS only at no extra charge. This probably one of the largest trunks in the industry.
|
|
1985 CCX
Sun December 10, 2006 3:55pm
Rating: 10
|
CSX3045 left front at RM Auction 2006
This is the car that Contemporary Classic Motorcars used to mold their bodies. CSX3045 sold at the RM Auction 1-19-07 for $1.43million.
|
|
1985 CCX
Sun December 24, 2006 1:29pm
Rating: 10
|
CSX3045 at RM Auctions 2007
This is the car that Contemporary Classic Motorcars used to mold their bodies.
Sold at the RM Auction 1-19-07 for $1.43 million....
|
|
Jim Holden
Wed August 22, 2007 12:44pm
|
ERA R&D GT Bodies in Progress
|
|
Anthony
Thu July 31, 2008 6:00pm
Rating: 10
|
Algon Fuel injection for 427 Hi-Riser heads
Here is an Algon mechanical fuel injection system for Hi-Riser heads, with canted throttle bodies, perfect for an under the hood application.
|
|
taylor-played
Thu August 28, 2008 11:46am
|
CMC Scale Reading with Driver & Passenger
2142 lbs. Empty
2592 lbs. w/2 bodies in the car
|
|
1ntCobra
Mon September 22, 2008 5:42pm
Rating: 10
|
Bodies from AC
Advertisement from SAAC's The Marque magazine Vol. 2, No. 4. June-July 1977, page 72.
|
|
Rotax98
Tue December 27, 2011 7:59pm
|
Who_luvs_working_with_fibreglass
Who says kit bodies are straight and cant be improved in the back yard.
|
|
