 
Main Menu
|
|
Nevada Classics
|
|
Advertise at CC
|
| S |
M |
T |
W |
T |
F |
S |
| |
|
|
|
1 |
2 |
3 |
| 4 |
5 |
6 |
7 |
8 |
9 |
10 |
| 11 |
12 |
13 |
14 |
15 |
16 |
17 |
| 18 |
19 |
20 |
21 |
22 |
23 |
24 |
| 25 |
26 |
27 |
28 |
29 |
30 |
31 |
|
|
CC Advertisers
|
|
|
23 result(s) to your search. (bank)
|
· Next Page
|
|
Anthony
Sat August 7, 2004 12:19pm
Rating: 10
|
48mm IDA weber vs 58mm weber intakes
On the top is a new blue thunder 48mm IDA intake, with a 10 degree canted mount angle.
Below is a 1960's Hilborn Fuel injection system for a ford 427 with High Riser heads. The system consisted of two pieces, two banks of 4 throttle bores, of 2 7/16" (62mm) diameter, that are bolted to the top of the intake. I believe the intake has the 58mm weber bolt pattern and spacing. As you can see, the throttle bores are straight up, not canted at all. A somewhat rare intake. It has been polished, and no identification marks are visable. This should make alot of top end power. I unbolted one of the fuel injection throttle body castings to expose the mating surface of the intake.
As you compare the two intakes, you can see the larger bolt pattern of the 58mm weber intake, as well as the larger ports. There isn't enough of material on a 48IDA intake to redrill for a 58mm pattern.
|
|
Anthony
Sat August 7, 2004 12:22pm
Rating: 10
|
48mm IDA intake vs Hilborn fuel injection on 58mm weber intake
On the left is a new blue thunder 48mm IDA intake, with a 10 degree canted mount angle.
On the right is a 1960's Hilborn Fuel injection system for a ford 427 with High Riser heads. The system consisted of two pieces, two banks of 4 throttle bores, of 2 7/16" (62mm) diameter, that are bolted to the top of the intake. I believe the intake has the 58mm weber bolt pattern and spacing. As you can see, the throttle bores are straight up, not canted at all. A somewhat rare intake. It has been polished, and no identification marks are visable. This should make alot of top end power. I unbolted one of the fuel injection throttle body castings to expose the mating surface of the intake.
As you compare the two intakes, you can see the larger bolt pattern of the 58mm weber intake, as well as the larger ports. There isn't enough of material on a 48IDA intake to redrill for a 58mm pattern.
|
|
jorocks
Sat January 15, 2005 4:14pm
|
2000 Johnex Shelby Cobra Replica
2000 Johnex Shelby Cobra Replica, designed by Can-Am Motosports, out Toronto, Canada, This one owner, lady driven cobra, arrived Turn Key from Johnex Motorsports in Nov., 2000. This is not a donor (completely assembled with new, custom automotive parts). This Cobra is not your average replica; Johnex commissioned one of the most successful race-chassis design firms in North America, CSC Racing (Canadian Stock Car), to design this frame. The "space" or "three dimensional" frame is a stronger, race ready frame, designed to handle race tuned, big block power unlike the weaker "ladder" or "two-dimentional" frames used on most other replicas. The powder coated tubular frame uses 2" x 4" rectangular steel tubing as the main perimeter rail and 1 3/4" tubular upper frame rails with a triple cowl hoop for addtional support. Johnex has since changed hands after the production of this Cobra and is now Johnex 3. This replica is comparable to the more well know Superformance and ERA replicas.
For additional info go to:
- www.houseofcobras.com/johnex.html
- www.clubcobra.com/
- www.fordmuscle.com/archives/2000/01/cobrarep/index.shtml
- http://www.centralservicesinc.com/johnex/index.html
- www.cscracing.com
BASIC INFO
- Lady Driven
- One Owner
- Owned Clear Title
- VIN Assigned
- Passed British Columbia, Canada Vehicle Safety Inspection
PERFORMANCE
- 0 to 60 miles in 5.6 seconds (using clutch)
- Approx. 320 HP (not tested)
- 2464 pounds
BODY & STYLE
- BMW blue, hand laid and baked fiberglass body
- Chrome roll bar (bolted to frame) and polished aluminum side vent louvers
- Polished stainless steel gas cap
- Flat black side pipes and bumperettes
- Brass chrome plated winsheild frame and chrome plated wipers
- Adjustable driver seat (fits 5’0” to 6’4” tall)
- Black vinyl/carpet, VDO gages.
- RJS 2" 4 point racing harness
- 15" Chrome plated, Flat Spoke 5 stars
- BF Goodrich T/A's; P215/60R15 front, P245/60R15 rear
ENGINE & SUSPENTION
- Assembled with all new high performance parts
- Ford 5.0 block and crank (machined, relieved and fully balanced)
- Eldelbrock Performance intake manifold (aluminum)
- 600 CFM holley carburetor (custome jetted)
- MSD 6 A ignition system
- Ford T5/standard transmission
- Billet aluminum pulley's
- Hydrolic clutch conversion (Wilwood billet slave cylinder)
- CSC Racing designed tubular frame chassis using 2"x 4" rectangular steel tubing as the main perimeter frame rail and 1 3/4" round tube upper frame rails with a triple cowl hoop for additional support. Frame is finished in black Powder Coat.
- Double-sheer suspension bracketry, coil over suspension with adjustable ride height front and rear. Springs are finished in a yellow Powder Coat. Tubular A- Arms finished in red Powder Coat.
- Tildon pedals. Dual master cylinder brake system with 11" disc, oversized calipers in
front and drum brakes in the rear. Adjustble bias.
- Manual stearing, rack and pinion (ready for power conversion, just needs nascar style pump plumbed in).
- Ford 8.8" rear end, limited slip, 3.55 gear ratio.
- 2734 miles.
CONDITION OF SALE
Payable by bank draft. No trades. No test pilots, serious inqires only. Ownership and registation of the vehicle will be transfered to the buyer after the selling price is paid in full. The buyer will be responsible for all transportation arrangements and any cost related to the purchase. Car is sold as is. This cobra is appraised at $41 000. US or $50 000. CAN and is priced to sell at $29 000. US or $35 000. CAN obo.
|
|
jorocks
Sat January 15, 2005 4:19pm
|
2000 Johnex Shelby Cobra Replica
2000 Johnex Shelby Cobra Replica, designed by Can-Am Motosports, out Toronto, Canada, This one owner, lady driven cobra, arrived Turn Key from Johnex Motorsports in Nov., 2000. This is not a donor (completely assembled with new, custom automotive parts). This Cobra is not your average replica; Johnex commissioned one of the most successful race-chassis design firms in North America, CSC Racing (Canadian Stock Car), to design this frame. The "space" or "three dimensional" frame is a stronger, race ready frame, designed to handle race tuned, big block power unlike the weaker "ladder" or "two-dimentional" frames used on most other replicas. The powder coated tubular frame uses 2" x 4" rectangular steel tubing as the main perimeter rail and 1 3/4" tubular upper frame rails with a triple cowl hoop for addtional support. Johnex has since changed hands after the production of this Cobra and is now Johnex 3. This replica is comparable to the more well know Superformance and ERA replicas.
For additional info go to:
- www.houseofcobras.com/johnex.html
- www.clubcobra.com/
- www.fordmuscle.com/archives/2000/01/cobrarep/index.shtml
- http://www.centralservicesinc.com/johnex/index.html
- www.cscracing.com
BASIC INFO
- Lady Driven
- One Owner
- Owned Clear Title
- VIN Assigned
- Passed British Columbia, Canada Vehicle Safety Inspection
PERFORMANCE
- 0 to 60 miles in 5.6 seconds (using clutch)
- Approx. 320 HP (not tested)
- 2464 pounds
BODY & STYLE
- BMW blue, hand laid and baked fiberglass body
- Chrome roll bar (bolted to frame) and polished aluminum side vent louvers
- Polished stainless steel gas cap
- Flat black side pipes and bumperettes
- Brass chrome plated winsheild frame and chrome plated wipers
- Adjustable driver seat (fits 5’0” to 6’4” tall)
- Black vinyl/carpet, VDO gages.
- RJS 2" 4 point racing harness
- 15" Chrome plated, Flat Spoke 5 stars
- BF Goodrich T/A's; P215/60R15 front, P245/60R15 rear
ENGINE & SUSPENTION
- Assembled with all new high performance parts
- Ford 5.0 block and crank (machined, relieved and fully balanced)
- Eldelbrock Performance intake manifold (aluminum)
- 600 CFM holley carburetor (custome jetted)
- MSD 6 A ignition system
- Ford T5/standard transmission
- Billet aluminum pulley's
- Hydrolic clutch conversion (Wilwood billet slave cylinder)
- CSC Racing designed tubular frame chassis using 2"x 4" rectangular steel tubing as the main perimeter frame rail and 1 3/4" round tube upper frame rails with a triple cowl hoop for additional support. Frame is finished in black Powder Coat.
- Double-sheer suspension bracketry, coil over suspension with adjustable ride height front and rear. Springs are finished in a yellow Powder Coat. Tubular A- Arms finished in red Powder Coat.
- Tildon pedals. Dual master cylinder brake system with 11" disc, oversized calipers in
front and drum brakes in the rear. Adjustble bias.
- Manual stearing, rack and pinion (ready for power conversion, just needs nascar style pump plumbed in).
- Ford 8.8" rear end, limited slip, 3.55 gear ratio.
- 2734 miles.
CONDITION OF SALE
Payable by bank draft. No trades. No test pilots, serious inqires only. Ownership and registation of the vehicle will be transfered to the buyer after the selling price is paid in full. The buyer will be responsible for all transportation arrangements and any cost related to the purchase. Car is sold as is. This cobra is appraised at $41 000. US or $50 000. CAN and is priced to sell at $29 000. US or $35 000. CAN obo.
|
|
jeffko
Wed May 18, 2005 6:04am
|
Distributor Gear Oiling
Drilled a .040 hole in the right bank oil galley plug. Steel gear and lots of oil should solve the problem of the cam munching distributor gears.
|
|
fastraxsg
Thu December 1, 2005 6:56am
|
The Roadster Bank of Jakarta
The place my wife thinks I put all of our savings....
|
|
Churchy
Tue August 22, 2006 4:19am
|
|
ceslaw
Tue September 5, 2006 7:53pm
Rating: 10
|
Everett Morrison Gen IV Chassis
Right cylinder bank. "Engine Art." September 5, 2006.
|
|
r1duley
Mon December 11, 2006 2:07pm
Rating: 10
|
My Car until the cobra comes along
Not bad to look at - waiting for my wife to break the bank on a cobra
|
|
Trevor Legate
Tue January 9, 2007 9:02am
Rating: 10
|
AC_Cobras_172
The 1964 AC Le Mans Coupe (A98) on the Brooklands banking
|
|
Trevor Legate
Mon June 25, 2007 9:12am
Rating: 10
|
Banking_Members_Bridge_Brooklands
|
|
Dwight
Sun December 2, 2007 7:19am
|
Handy_Fest_July_07_47_
drive-thru banks are a great place to wait out the rain
|
|
CSX3018
Thu July 11, 2013 5:57am
Rating: 10
|
SAAC38 Judith, Jenny and I going to the Banks
|
|
FUNFER2
Sun July 8, 2018 6:06pm
|
Original Cobra From My Home Town
A Cobra comes home: Now worth $1 million, rare car returns to Lincoln.The last time this car was in Lincoln, its owner had just finished grad school and had no idea it could make him a millionaire.
Steve Woehrle paid $5,300 for the second-hand Shelby Cobra from an O Street corner car dealer in 1973, and now he was shifting it into drive and running north out of town, first to a teaching gig in South Dakota and then to a long-term tenure in Minnesota.
Woehrle and his Cobra are returning to Lincoln next weekend, but the retired professor won’t be behind the wheel. Instead, the car he bought 45 years ago will arrive by truck and trailer, with a security detail and an estimated value of more than $1 million.
College student bought this 1965 AC Shelby Cobra in Lincoln for $5,300 in 1975. Today, it has estimated value of more than $1 million. The car is on display at Okoboji Classic Cars but will return to Lincoln July 13-15 during the Mustang Club of America’s national show outside Pinnacle Bank Arena.
|
|
FUNFER2
Sun July 8, 2018 6:07pm
Rating: 10
|
Original Cobra From My Home Town
A Cobra comes home: Now worth $1 million, rare car returns to Lincoln.The last time this car was in Lincoln, its owner had just finished grad school and had no idea it could make him a millionaire.
Steve Woehrle paid $5,300 for the second-hand Shelby Cobra from an O Street corner car dealer in 1973, and now he was shifting it into drive and running north out of town, first to a teaching gig in South Dakota and then to a long-term tenure in Minnesota.
Woehrle and his Cobra are returning to Lincoln next weekend, but the retired professor won’t be behind the wheel. Instead, the car he bought 45 years ago will arrive by truck and trailer, with a security detail and an estimated value of more than $1 million.
College student bought this 1965 AC Shelby Cobra in Lincoln for $5,300 in 1975. Today, it has estimated value of more than $1 million. The car is on display at Okoboji Classic Cars but will return to Lincoln July 13-15 during the Mustang Club of America’s national show outside Pinnacle Bank Arena.
|
|
|
All times are GMT -7. The time now is 03:15 PM.
Links monetized by VigLink |
