mloy
Sun March 13, 2005 12:40pm
Rating: 9.5
|
RH Front A-Arm Bushing Test Fit
|
|
Rodney
Wed February 1, 2006 10:58am
|
IMG_2320
My custom built small block engine mounts.
laser cut
Tig welded
powder coated
stainless steel hardware
polyurethane bushing
Absolutely no engine vibration transmitted to the chassis and Absolutely no engine movement associated with torque!!
|
|
Morris
Sat September 23, 2006 6:22pm
|
Oilite Bronze bushing stock
|
|
Morris
Sat September 23, 2006 6:22pm
|
|
slow_motion
Wed March 28, 2007 11:49am
|
new hub w/protective case, flamming river rack w/solid bushings & tie r
|
|
franklin
Sun August 26, 2007 2:11pm
Rating: 10
|
T Bird Spindles Powder Coated Poly Bushings
|
|
TWOOD
Fri March 14, 2008 4:29pm
|
DOOR LATCH RELEASE LINKAGE
View at top end of lionkage with the 1/4" dia. shaft passing through the bronze bushing (epoxied to fiberglass). Lever is attached to end of shaft. Hole in shaft is threaded and has nylock jam nuts on each side.
|
|
TWOOD
Fri March 14, 2008 4:37pm
Rating: 10
|
door latch release mechanism
Interior view of bronze bushing. Typical hardware store item. 1/4" ID with a flange of about 5/8".
|
|
donraye
Tue July 8, 2008 4:26pm
|
1966 Street Beast Cobra, Grabber Orange
This is the car in June 2008 before several recent changes were made. Additions included front and rear 12 way adjustable coil over conversions, custom upper and lower rear control arms with polyurethane bushings and upper rear Spherical Bearings, passenger side roll bar, 17" authentic Hallibrand wheels and Kuhmo tires, stainless heat shields on side pipes, custom grilles on all front oppenings, heavy duty oil cooler, LPS rear "Ultimate 8.8" differential cover, engine and firewall paint work to match exterior color, new orthopedic seats in grey leather, and other ninor changes. All work was done by me.
|
|
xracerbob
Fri December 11, 2009 8:20am
|
|
JCoop
Sun February 14, 2010 7:53am
|
L underside #1052
shows greasable swaybar bushing and Canton 7 qt. oil pan.
|
|
67JET
Thu September 23, 2010 8:33pm
|
Gets rebuild with all new bushings after cleaning and fresh paint.
|
|
flaflier
Tue October 2, 2012 5:47pm
|
|
flaflier
Tue October 2, 2012 5:47pm
|
Steering bushing possible crack
|
|
rodneym
Tue January 26, 2016 12:00pm
|
FE pilot bushing
FE pilot bushing. One on left has interference due to a batch of Quicktime BH's being a bit shallow (from late 2009/early2010). One on right is a simple, cheap approach rather than a new BH or spacers.
|
|
