Naja
Sat August 17, 2002 12:21pm
Rating: 8
|
'Naja evolvere' with 5 spoke wheels
This shows the 17 inch 5 spoke wheels from PS Engineering. I wanted Torque Thrust D's, but wanted 17 inch wheels more - didn't want chromed or polished. These were the only ones I could find. Tires are 245/40/17 fronts and 315/35/17 rears - Yokohama AVS Sports (these and Michelin Pilot Sports are the most aggressive street tires made).
My daughter was the first passenger to ride in the car.
|
|
ronzara
Sun August 10, 2003 4:05pm
Rating: 1
|
Polished Weiand Stealth Intake
Weiand Stealth Intake, polished. 8-2003
|
|
FUNFER2
Wed August 4, 2004 3:59pm
Rating: 10
|
New Team III wheels
I like'em. Good quality & half polished.
|
|
Brent Mills
Sat February 5, 2005 2:35pm
Rating: 10
|
KMP286 course polished. SHINY!
|
|
John A. Simpson
Sun April 3, 2005 9:07pm
Rating: 10
|
Polished Center and Matt
My Son-in-law Matt showed up to help layout the stripes. The center is now polished.
|
|
bobcowan
Mon November 7, 2005 7:33pm
Rating: 10
|
Momar EFI1
These billit air cleaners were polished. I powdercoated them to match the car.
|
|
Robert Sobers
Wed November 9, 2005 10:31am
|
Shelby R Model Clone
My 66 Shelby R Clone Specs.
D.S.S. Pro Bullet 306/308 Short Block Level 10 CNC
Rods: Forgings, shot-peened, Magna Fluxed, CNC Diamond resized and fitted with ARP Wave Loc rod bolts. Balanced to racing tolerances.
Crank: Production crankshaft, thermal cleaned, shot-peened, Magna Fluxed, precision ground, oil scooped and chamfered and balanced to racing tolerances.
Pistons: DSS PRO-LITE Forged 2 valve relief flat top, CNC fly-cut for most aftermarket race cams and heads. Balanced to racing tolerances.
Rings: Sealed Power/ Speed-Pro Moly rings.
Bearings: Tri-metal rod and main bearings.
Block: 5.0 roller cam block, thermal cleaned, stress relieved, Magna Fluxed, threads chased, mains checked and corrected, oil galleys tapped for thread in plugs and the decks are CBN squared and equalized.
Transmission- C4 Automatic
Rear End- 8 Inch Detroit Locker 355 Gears.
Gt40Y Heads ported and polished.
Comp Cam by Bennett Racing Cams.
Edelbrock Air Gap Manifold
670 Holley Street Avenger Carb.
1.6 Roller Rockers
MSD Distributor
MDS 6AL Ignition Control Unit
Edelbrock Fuel Pump
Edelbrock Water Pump
AFCO Aluminum Radiator
Canton 7 QT. Oil Pan
Windage Tray
Shelby R Valve Covers with Vent Stacks
Holley Electric Fuel Pump
3/8 Stainless Fuel Line Tank to Pump
Spal Electric Fan
3 ¾ Auto-Meter Tach
Raptor LED Shift Light
Hurst Quarter Shifter with Line-Lock
K&N X-Stream Air Cleaner
Trunk Mounted Battery with Cut Off Switch
PA Performance 3-G Alt.
PA Performance Mini-Starter
Total Control Products Strut Tower Brace System
Total Control Products Sub-Frame Connectors
Auto-Power Roll Bar
Simpson Safety Harness
Hunsaker Racing Seats
Mac Headers
Mac Exhaust System with 2 ½ Inch Dumps.
R-Model Gauge Panel with 2 5/8 Autometer Gauges.
Cobra Country Oil Breather System.
|
|
Venomus
Fri January 20, 2006 4:19pm
|
Finally....a rolling chassis.
Also a picture of a Stainless fuel tank that we just made. It actually will bolt on from underneath the frame and will be removeable once the body is on. It still need to be polished.
|
|
67JET
Fri May 11, 2007 7:29pm
|
Freshly cut
Freshly cut and polished.
|
|
letsboogie351
Tue November 13, 2007 12:00am
Rating: 10
|
dashboard
Next the dash is off to have a timber centre piece shaped and polished. Dash will be covered in dark grey/charcoal leather prio to fitting timber centre
|
|
Baz
Thu September 17, 2009 2:41am
|
Heat_Shields_for_Side_Pipes_Small_
Stainless Steel Side Pipes fitted. They have to have the welding ground smooth and polished.
|
|
Wbulk
Sun March 20, 2011 8:22pm
Rating: 8.5
|
Making my own trim rings
Cut out of 1/8 aluminum. The two on the top still need to be polished.
|
|
