kitcarbp
Thu November 1, 2012 10:38am
Rating: 10
|
Finished Custom Fuel Tank
Trunk mounted tank for my West Coast
|
|
Earl J
Fri November 30, 2012 9:09pm
Rating: 10
|
1965 GT350 w/48 IDA's
My engine bay as of 11-29-2012. Breathers and vent tank in full view routing. Mounted without drilling a single hole.
|
|
Ant
Tue December 4, 2012 12:40am
|
Engine Mounted.
373 Ford, Jerico Five speed.
|
|
cobrajeff
Wed January 1, 2014 8:49am
|
modified ERA hood latch catch
This shot from below shows how I riveted the replicated catch to the ERA original catch. Also note I mounted the ERA catches BEHIND the firewall so they were more hidden.
|
|
Matsango
Mon February 3, 2014 7:02am
|
|
cycleguy55
Sat September 13, 2014 7:42am
Rating: 10
|
Mirror & Windshield Pillar Mount
Mount made from 3/16" sheet aluminum, mounted under wind wing mounts with longer 5 mm stainless steel socket head cap machine screws.
|
|
Morris
Thu January 15, 2015 2:06pm
|
|
ugomobility
Tue May 19, 2015 1:23am
|
wheelchairs hawaii
wheelchairs hawaii
Renting a power, motorized wheelchair during your family vacation in Hawaii is just as easy as renting a mobility scooter. The key difference is that power wheelchairs often referred to as electric wheelchairs, are driven with a joystick that can be mounted on the left or right side of the arm rest.
|
|
rodneym
Wed April 13, 2016 8:28pm
Rating: 10
|
Spal pusher on front of Fluidyne radiator
Spal pusher mounted directly in front of rear Spal on Fluidyne radiator
|
|
Morris
Thu April 12, 2018 3:17pm
Rating: 10
|
Rear Roll Bar Mounted in C-Channel
|
|
Morris
Thu April 12, 2018 3:17pm
|
Rear Roll Bar Mounted in C-Channel
|
|
Morris
Thu April 12, 2018 3:17pm
|
Rear Roll Bar Blocks Mounted
|
|
Morris
Thu April 12, 2018 3:17pm
|
Rear Roll Bar Mounted ....
|
|
dacobb
Sat October 20, 2018 8:59am
Rating: 10
|
3018 body mounted to frame
|
|
powrby4d
Wed September 23, 2020 3:43pm
Rating: 10
|
Clutch MC and brake MC in reverse positions
This shows the clutch MC next to the steering shaft with the brake MC mounted behind it to the fender well, with the clutch MC activated by this odd bellcrank type arm that may be messing up the pedal ratio. Trying to sort out why my clutch is both super heavy pedal pressure AND has to go all the way to the floor to disengage. Anyone know if this is a standard shell valley setup? The other end is a hydraulic throw out bearing, looks like a Tilton.
|
|
