W2zero
Sat May 14, 2005 8:14pm
|
FRPP rear disc, Dutchman axles
Narrowed nine inch, Detroit locker, 4.11 gears, Dutchman 31sp axles, FRPP rear disc brakes.
|
|
Brent Mills
Tue May 24, 2005 5:57pm
|
Narrowly missed the sign.
|
|
Brent Mills
Tue May 24, 2005 6:01pm
|
Wider view...
This is the onramp I landed in backwards narrowly missing oncoming cars.
|
|
nanard289
Sat May 6, 2006 1:50pm
Rating: 10
|
Trottle drive
Trottle drive system is from Inglese but it is modified to have a lateral control rod instead of central (central space was too narrow!)
|
|
fastraxsg
Thu November 16, 2006 7:33am
|
radiator modification
Constantly overheated so changed to a moulded and extended CJ-7 combination. Temp stays at 180 degs even in traffic with the little 10" pusher fan on . That's in 97 deg. afternoon sun, our typical afternoon. Measured engine bay, too narrow for any modern V-8 or V-6 so have been looking at a Supra in-line six with turbo(s) to put the oomph into the drive.
|
|
slow_motion
Wed March 28, 2007 12:21pm
|
narrowed 8.8 rear end w/auburn pro 31 spinle & moser axles
|
|
RJCCOBRA
Tue December 2, 2008 3:07pm
|
Shell Valley build
Here's the narrowed 9 inch Ford rear end with its first coat of satin black paint. The rear end has a 3.50 posi center section. And yes, those are 11 inch drum brakes. Hey, this is a budget build.
|
|
52chevyred
Fri January 1, 2010 7:50am
|
Street Beasts Driver Sidepipe
Here is the Street Beasts sidepipe on the driver side. Another lesson learned: if you use a 351W for mock up and are installing a 302, THERE IS A DIFFERENCE! The 302 is 2" narrower (at the head) and about 1" lower (at the head) than the 351. We had to "adjust" the motor mounts when I put the dummy 302 in.
|
|
SunDude
Mon October 31, 2011 5:44am
Rating: 10
|
CSX3136 at Legendary Motorcar (Oct 2011)
Gorgeous 427 narrow-hip Cobra, restored to its original specification and colour.
|
|
SunDude
Mon October 31, 2011 5:44am
Rating: 10
|
CSX3136 at Legendary Motorcar (Oct 2011)
Gorgeous 427 narrow-hip Cobra, restored to its original specification and colour.
|
|
SunDude
Mon October 31, 2011 5:44am
Rating: 10
|
CSX3136 at Legendary Motorcar (Oct 2011)
Gorgeous 427 narrow-hip Cobra, restored to its original specification and colour.
|
|
SunDude
Mon October 31, 2011 5:44am
Rating: 10
|
CSX3136 at Legendary Motorcar (Oct 2011)
Gorgeous 427 narrow-hip Cobra, restored to its original specification and colour.
|
|
cobrajeff
Fri December 28, 2012 3:44am
Rating: 10
|
Space-Saver spare on Campagnolo rim
Weldcraft Wheels in Livonia, MI narrowed a 7" wide Pantera rim down to 5.5" so that I could mount a collapsible Space-Saver spare tire on it.
|
|
justcobra
Sun January 6, 2013 7:30pm
|
RMC Series 3
Left hand photos showing door opened with red buckets fitted although temporary.
These buckets were previously fitted to a older Cobra and bought on ebay for $100 a pair.
They are SAAS modified seats with a 41cm base/cushion
The seats look good but I think a little narrow!
|
|
Anthony
Sun October 16, 2022 7:16pm
|
Fast Furious ‘cuda
This 1973 ‘Cuda was used in the movie Fast Furious 7, as Letty’s main car. Of the several ‘cuda’s used for filming, this was the “hero” car. It’s pretty much a stock 340 4 speed, made up like an AAR ‘Cuda. It has a fiberglass lift off hood, custom wheels similar to the ?1969 Kelsey Hayes wheels. The leaf spring 8 3/4 rear was swapped for a 4 link coil over shock suspension, with a narrowed Ford 9”, with disc brakes.
|
|
