1985 CCX
Tue May 8, 2007 6:57pm
|
CCX - Cowl work
Fabricating aluminum shroud prior to lining the rest of the hoop with metal.
|
|
1985 CCX
Sun August 12, 2007 2:17pm
Rating: 10
|
Contemporary Dash
Details under dash cowl include rivets
|
|
63mercury
Mon March 31, 2008 6:32pm
|
Cobra Build
cowl hoop in place
|
|
rdc767
Sun July 13, 2008 9:35pm
|
cowl bar frame right lower
|
|
RJCCOBRA
Thu November 13, 2008 3:17pm
|
Shell Valley build
The cowl hoop & windshield are mounted, and drivers side rear wheel well sectioned for tire clearance. I don't know what jig Shell Valley used to align the interior tub to the body, but it was way off. I'll probably have pictures of the fiber glassing effort later.
|
|
n6opv
Mon January 19, 2009 11:05pm
|
Arntz notched cowl
Arntz loved Chevy engines but with the engine set so far back in his chassis, the distributor ended up under the cowl. This notch was his solution on some late Type 3 cars and all Type 4. For those of us with Ford engines, it allows plenty of room for the oval Cobra air cleaner or dual quads. This notch did not appear on any Butler cars.
|
|
n6opv
Thu January 22, 2009 11:23pm
|
Arntz tranny tunnel
Shown here is the removable section of the tranny tunnel. With the big engine setback in all the Arntz / Butler cars, you can remove the transmission while seated if you desire. Only a few very late Butlers had this and all Arntz Type 4 cars. I have no idea what the many cutouts are for  Also shown are the two triangulation tubes that connect the center of the cowl hoop to the 2 main frame rails for increased rigidity. The 3rd leg of the roll bar (not shown) also attaches to the same point on the passenger side frame rail. This is Arntz Type 4 only as well.
|
|
cobbindale
Wed April 29, 2009 10:02pm
Rating: 10
|
Filler in doors
Body filler in doors, cowling and sills
|
|
Randy Rosenberg
Thu September 17, 2009 8:58pm
|
|
cobrajeff
Tue December 22, 2009 8:17am
|
Cage
Cage welded into cowl sides, and tunnel brace extended down to meet the frame rails.
|
|
krausewich
Wed May 12, 2010 6:08am
Rating: 10
|
Cowl hoop and center brace tubes
Cowl hoop and center brace tubes
|
|
krausewich
Sat June 12, 2010 5:49am
|
Cowl and dash support bracing now added
|
|
KarlCSX2498
Sun June 27, 2010 3:23am
Rating: 10
|
front cowl tube hammer in
|
|
289 Mk111
Sun April 29, 2012 11:53am
Rating: 10
|
Turn signal switch and Cowl
Mini Mk11 Turn, indicator switch and MGB Cowl assembled
|
|
Dan Case
Mon November 16, 2015 5:54am
Rating: 10
|
Air Duct Elbow Clamp
Fixes rubber elbow to steel jumper tube adapter for flex hose up to cowl.
|
|
