Baz
Sun January 11, 2009 7:54pm
|
Re-Designed and Re-Positioned brake pedal.
When we originally done the brake pedal, as can be seen in earlier photo, we used the standard size VZ HSV SS Commodore pad on the brake pedal shaft. When it was fitted, it was discovered that there was nowhere to rest or place my left foot, other than on the floor in front of the brake. The pedal shaft was straightened and the pad reduced in size. Now it's perfect.
|
|
kitcarbp
Mon February 23, 2009 5:59am
Rating: 10
|
Team Three Wheel for my West Coast- Custom sizes
Here is an image of the Team III wheel I am using on my West Coast Cobra, rear wheel is 12 inches wide and barely fits my 15 inch 325 BFG Drag Radials
|
|
kitcarbp
Fri March 27, 2009 10:17am
Rating: 10
|
Edelbrock/Ford SVO 429/460 Pump Flow Chart
Here is a chart I put together that compares the two different popluar pulley sizes available in the aftermarket for the 429/460 in fancy shmancy polished powder coated clear aluminum pulleys. The big pulley is not the way to go, you cant get enough flow to cool these high horsepower motors on the street.
|
|
Krait
Wed April 1, 2009 7:37pm
|
Warwick trying plate for size
|
|
DocDirk
Sat April 25, 2009 1:13pm
|
Auto Tranny vaccum origin
I put the auto tranny vacuum hose on this 1/8" vacuum outlet because it matches the modulator intake at the tranny - both are 1/8" size. Larger vacuum at the back of the carb I used for the brakes alone.
|
|
TWOOD
Sun September 13, 2009 2:00pm
Rating: 10
|
Two sizes used
Smaller dia. bulb "splices" into the larger bulb by slipping into the ID. Should help to keep the water out.
|
|
kitcarbp
Mon September 21, 2009 7:13am
Rating: 10
|
Griffin Rad for West Coast
Here is a top view of the Griffin 2 row rad 16 x 26 core size using 1.25" wide tubes.
|
|
eschaider
Mon October 5, 2009 10:53pm
|
Oil System Remote Filter
Filter side of remote showing NASCAR sized WIX Filter mount
|
|
Tom Kirkham
Mon November 30, 2009 10:06am
|
PV circuit mod
Drilling the PV jets to the desired size
|
|
LightNFast
Mon February 18, 2013 9:33am
Rating: 10
|
FIA_Suitcase_Study1
It’s documented that (2) AC factory cars were prepared with FIA suitcase "dimples" (See Photos). The second modification was to enlarge the trunk base to allow the suitcase to fit upright (vertical) and further down into the trunk as shown. If you look closely at the photo you can see the suitcase also fit horizontal and was held in place with a “bungee cord”. You can also see the bolts protruding out the bottom of the suitcase which originally held the suitcase upright. I think this also explains why some of the FIA cars had dimples while others didn’t.
As for the actual size of the suitcase – FIA Historic Racing Championships - Appendix J. Both 1964 and 1965.
State:
“270 - Luggage trunk
A covered space being an integral part of the coachwork but outside of the space occupied by the front seats, large enough to receive a trunk of
65 cm X 40 cm X 20 cm. minimum, besides the spare wheel, tools or the folded hood, shall be provided, excluding the spare wheel, tools or removed canopy.”
|
|
sinkers46
Wed June 18, 2014 8:57pm
Rating: 10
|
First step in Cobra build.
Snake Pit check for size
|
|
Pete Munroe
Mon September 22, 2014 8:23pm
Rating: 10
|
Mickey Thompson S/R radials 26x12
M/T S/R radials size 26x12. Tires work great are much stickier than a standard street radial IMHO.
|
|
Pete Munroe
Mon September 22, 2014 8:23pm
Rating: 10
|
Mickey Thompson S/R radials
M/T S/R radials size 26x12 are on the REAR only.
Like the tires a lot...much stickier than the old Dunlop G/T Qualifiers.
|
|
csx4910
Thu January 28, 2016 2:28am
|
Mac Tool MAcsimizer Tool Chest for Sale
Darrell Gwynn's Mac Tools MB1900 roller cabinet with over 48,000 cubic inches of storage space. Full extension drawers for easy access to tools. Drawers are fully interchangeable for custom organization. Size 88"x47"x27" $10000 new , asking $6000
|
|
Dan Case
Thu April 4, 2019 10:56am
Rating: 10
|
|
