John Poling
Fri April 5, 2002 7:04am
Rating: 10
|
Single Rollbar
Shot of rollbar mounted, it is about 1.5" too low in this picture and has been raised.
|
|
JCoop
Mon June 26, 2006 7:22am
Rating: 10
|
48IDA Webers Under GT40 glass
Too bad the anti-reversionary plates hit the glass when fitted. They don't look too bad without them, though; especially with those Inglese filters. The rearmost stack is just about 1.5" below the glass.
|
|
jeffko
Wed November 7, 2007 10:50am
Rating: 10
|
Just needed 1.5 mil more to win
|
|
martrogers
Thu July 3, 2008 4:17am
Rating: 9
|
butterfly exhaust valve
Experimental exhaust valve, steel generally with stainless 1.5mm butterfly plate and screws. To enable diversion of a small amount of exhaust into sidepipes to provide better sound. One each side.
|
|
n6opv
Mon January 19, 2009 11:25pm
|
Arntz / Butler door
This is the final version of the Arntz / Butler door. The inner and outer fibreglass panels conceal a 2 x 4 x 0.120 wall steel tube for crash protection and rigidity. A VW door latch, striker and handle let you in and out. A plate is welded on the front, to which the hinges bolt and adjust. The hinges are press formed from 1.5 x 0.5 solid steel bar and swing on delrin bushes. Unique to the Arntz Type 4 are the Mercedes door pin and socket (just above the latch) that solidly ties the door to the rest of the cage surrounding the passenger compartment.
|
|
Garage10
Sun April 19, 2009 10:37pm
|
wcc rad
supposed to be a 28.5Wx15.75Hx4thick 7 core but is 1.5x2core
|
|
Zedn
Tue July 21, 2009 6:04am
|
travel
Getting her home. Sydney - Melbourne - Sydney. 24hours driving in 1.5 days, I was glad to get home!
|
|
kitcarbp
Mon September 21, 2009 7:20am
Rating: 10
|
West Coast Griffin Rad Brackets
Here is a shot of my custom rad brackets made from 1/8 x 1.5" aluminum strip. Its a two peice design without welds and is adjustable to the core thickness. This core is 2.75" wide. I used High density EPDM sponge foam to line the inside of the bracket to absord vibration and protect the core frame.
|
|
kitcarbp
Mon September 21, 2009 8:22am
Rating: 10
|
VDO oil temp sender for oil pan drian plug- 14mm x 1.5
This oil temp sensor threads into 460 crate engine oil pan in place of the standard drain plug.
|
|
Chicagowil
Sun April 15, 2018 11:53am
Rating: 10
|
Kenne Bell 1.5 on 302
Extrude Honed stock lower
|
|
