Easiest windshield removal

[DonC]

Have done mine a couple of times on my ERA. 4 screws on each side hold the windshield frame in the uprights. Two more in the bracket that mounts between the top of the dash and the center of the windshield frame. Undo those and the frame just lifts out from between the uprights.
DonC

[DanEC]

Leaving the legs in place may be the best approach. But be careful removing and reinstalling the four screws holding the frame to the posts on each side as they are short and thread into a brass nut strip. The threads could be stripped if not careful. Use some blue threadlocker and don't put too much torque on them.

[ERA Chas]

Originally Posted by DonC

Have done mine a couple of times on my ERA. 4 screws on each side hold the windshield frame in the uprights. Two more in the bracket that mounts between the top of the dash and the center of the windshield frame. Undo those and the frame just lifts out from between the uprights.
DonC

Yes that's what I said. Except Rod's is a KMS. I'm really surprised the very sharp KMS guys don't do it this way.
No matter-frame or just the glass, get a second set of good hands (no wife) with you.