New Build

[Tonus72]

I think people are trying to say - "keep your pharkn whinging to your own pharkn thread..."

But I could be wrong

[Cobra01]

Alloy Engine Mounts

There is a story with these engine mounts.
The original mounts were modified by Peter so he could manufacture the exhaust headers and then Greg and Craig made a further improvement to give even more room so that future headers would be easier to make.
The Pace Cobra is always evolving.

Headrests fitted to seat backs



Classic Steering Wheel



Well its all systems go at Absolute Pace with more Chassis and bodies being finished all the time.
I am just waiting for the Exhaust Headers to be finished the Windscreen and Gauges to arrive then its off to the engineer for Certification and a lane change test an inspection at QLD Transport then its enjoy time

Cheers

Brad

[spookypt]

Brad, that's got "Nats Virgin" written all over it!

Please tell us you are bringing it down to show the nation?

[Aussie Mike]

Originally Posted by Cobra01

Headrests fitted to seat backs

I like that head rest design. I was going to do something similar for my Kirkey seats. Is the frame made from stainless rod or tube?

I was going to weld brackets on the back of my seats for the uprights to go into but I reckon that bolt through setup with the steel plate will be easier to make and probably stronger.

Cheers

Michael