Picture #1: Offered for sale is an extremely rare Mickey Thompson Inline Autolite 2x4 Induction system for FE Ford Big Block. This auction includes everything pictured in Picture #1. This intake is very similar to the Mickey Thompson Dual Four Crossram for conventional Holley carbs except was purpose cast with carb pads for two Inline Autolite fours barrels. It is rumored there only a couple of these intakes cast. Those familiar with the MT Crossram know that it requires a distributor extension which is included with this sale.
Picture #2: Shown with CNC machined velocity stacks, adapter, and vstack screens and filters.
Picture #3: Shown with reference height dimensions. The system dimensions are 3” shorter without the velocity stacks and adapter. The height dimensions shown ¾” less with the engraved air filter assemblies
Picture #4 & #5: Shows close up of linkage. The linkage is configured so the shafts on each carb rotate the opposite direction to promote symmetric flow. Each carburetor has a return spring, and there is a redundant outboard return spring on the accelerator lever. All linkage is stainless steel and the rod ends are Teflon lined so they do not require lubrication that collects dirt and fowls the linkage. All fuel lines are braided stainless with anodized aluminum Earl’s fittings. Tough not visible in this picture (see picture #3) there is a custom billet aluminum fuel log with a single -8AN inlet and gauge port. The fuel log also serves as the mounting post for the linkage wheel.
Picture #7: The intake is unported and shown are reference dimensions.