Not Ranked
Hi Dan. Webers are very nice carbs,but they need alot on work to make them run well. 48mm carbs are limited to the rpm of the engineand size talk to enzo about the total flow per cylinder. They go flat on a fe 484 motor at about 6700 rpm. If you saw Dave Salkowski cobra in Kit Car 2 or 3 issues ago he is running a rare set of 58mm carbs and red lines at 7200 rpm. He spent over 50 hours on the dyno to sent his system up. You have to remember that 1 carb works one cylinder for all the flow. If you like fuel injection take a look at TWM inductions at their system. Their throttle bodys go to 52-54 mm, and I love my Fuel injection system on my car once it was set up. Good luck Rick Lake
|