Neutral
Are you sure of the 35 GPH?
these are my thoughts....i run a carb, actually 2 of them. i maintain a 5.5 to 6 psi with them.
with that being said a pump with only 35 gph may have delivery problems under hard acceleration, i say this because my mallory is rated at 140 GPH.
pumps that....lets say are a bit whimpier, flow in the 60 to 75 GPH range tend to run out of fuel for me with sustained acceleration using a 1\2 inch line and trying to overcome inertia pumping from the rear of the vehicle.
Fred
__________________
Fred B
|