Quote:
Originally Posted by Bob Putnam
'77
The bushings are made by TCI Engineering (800-854-9868), part 9952. We've got 'em for roughly $25/set of 4. Give Bryan a call.
|
I called them - they do not recognize this part number. I would like to try poly. An application cross reference would make it the easiest. I thought maybe they could advise me on this, but no luck.
I was able to track down the application for the uppers from the assembly manual, but since you manufacture your own control arms, it does me little good.
I assume the lower bushings are rubber since there are no zerks and after 10 years no squeek
(my car is North and not available for inspection). Can you provide an application for the lowers e.g. 73 Monte Carlo or provide a cross reference for poly?
x-cliff