View Single Post
  #7 (permalink)  
Old 12-27-2016, 03:15 PM
undy's Avatar
undy undy is offline
CC Member
Visit my Photo Gallery

Join Date: Jul 2005
Location: Virginia Beach, Va & Port Charlotte, Fl.,
Posts: 2,135
Not Ranked     

I'd reuse the old head gasket and temporarily bolt/torque the head back on with valve train. I'd then do a compression check along with a leak down test too. Compare all 4 cylinder to one another. I would also pull the springs and the valves on 1 and 2 cylinder, inspecting the guides and seal for condition/clearances.

I really doubt it's a richness issue.
Too many toys?? never!
Reply With Quote