Thread: " Bedding " procedure for Hard brake pads
View Single Post
  #1 (permalink)  
Old 10-23-2018, 05:56 AM
MOTORHEAD's Avatar
MOTORHEAD MOTORHEAD is offline
CC Member
Visit my Photo Gallery

 
Join Date: Feb 2001
Location: BRADENTON, FL
Cobra Make, Engine: KIRKHAM 427 S/C, SHELBY 427 ALUM. STROKER
Posts: 1,396
Not Ranked     
Default " Bedding " procedure for Hard brake pads
I have the replica Girling brakes with the very hard "racing" pads, and am wondering what might be the procedure to bed the pads. I know for street brakes, a few runs to 30-40 mph then hard braking will do the job, but that does not do the job with these pads. I have talked to a brake pad supplier regarding "street" pads, but they only had some less hard material that "may or may not" work well for street use". At $400 a set, I would want street use a certainty.
Anyone have experience with these brakes ? Tom Kirkham?
__________________
"When Injustice becomes Law,
Rebellion becomes Duty." T. Jefferson
Reply With Quote