[ronzara]

Hello,
I am using a CR Harness in an Everett Morrison Car. I have ALL mechanical gauges, and my Steering column has nothing but HORN, TURN SIGNALS and HAZZARD LIGHTS.

(NO DIMMER, NO CRUISE< NO HEAD LIGHTS/WIPERS)

I have the dash wired already for HEAD LIGHTS (#112, #171, and #141) >> What is # 144 ??
Says FUSE TO HI-BEAM - HI BEAM indicator light.

Would this wire run to my floor mount dimmer switch, then to the HI-Beam light on the dash>>>> this is where I am getting lost.

How is the FLOOR DIMMER wiring into the harness?

Also wipers. (My Switch is on th dash).

I want my dash gauge lights on a switch. Can I take the MAIN #146 and run it to the switch, then wire ALL the gauge lights positive leads to the switch?

What is the deal with #161 and #157 (FAN SWITCH) ??? Is #161 the MAIN POWER to the FAN switch and #157 the RETURN to the fan????

What do you suggest I do with all the wires I don't need?
Such as> COURTESY SWITCH WIRES,... TRUNK OPENER,...

The CR instructions are not real helpful. I'd appreciate you guys assistance.
RZ