View Single Post
  #5 (permalink)  
Old 06-07-2020, 10:39 AM
ERA 626's Avatar
ERA 626 ERA 626 is offline
CC Member
Visit my Photo Gallery

 
Join Date: Sep 2001
Location: Danville, CA
Cobra Make, Engine: CSX 6079 482CI CSX cross ram
Posts: 1,226
Not Ranked     
Default

Quote:
Originally Posted by Tjd View Post
Disconnect lower ujoint from the intermediate shaft that on the steering rack Pinion and see if itís in the steering column or in the rack thatís causing the bind there should be next to zero restriction when you turn the steering column when itís not connected to the rack give it a try and good luck
Tom
Thanks Tom, I have had the steering column apart several times because of the removal of my dashboard related to the drama I had with my gauges thanks to nissonger (jerk) another topic all together.

Its not in the steering column. I cant seem to separate
the tie rod from the spindle with out tearing up the rubber boot. is there a way to lubricate the steering rack?
Reply With Quote