Thread: Lykins Motorsports 418W, 540 hp, 586 lb-ft
View Single Post
  #1 (permalink)  
Old 09-22-2020, 03:14 AM
blykins blykins is offline
CC Member
Visit my Photo Gallery

 
Join Date: Dec 2001
Location: Louisville, KY
Cobra Make, Engine: I'm Cobra-less!
Posts: 9,391
Send a message via AIM to blykins
Not Ranked     
Default Lykins Motorsports 418W, 540 hp, 586 lb-ft














Did this one a few months back...

Factory 351W roller block, with a Scat 4340 4.100" stroke crankshaft. K1 rods, with Mahle pistons. One of my custom hydraulic roller camshafts with OEM style Ford Racing hydraulic roller lifters. AFR 220cc cylinder heads with a Performer RPM Air Gap intake.

Customer will change to throttle body EFI after installation, but we dyno'd this one with a Holley 830 dyno carb.

Peak hp was at 5700 rpm.
__________________
www.lykinsmotorsports.com
Reply With Quote