View Single Post
  #9 (permalink)  
Old 11-15-2020, 05:13 PM
ERA 626's Avatar
ERA 626 ERA 626 is offline
CC Member
Visit my Photo Gallery

 
Join Date: Sep 2001
Location: Danville, CA
Cobra Make, Engine: CSX 6079 482CI CSX cross ram
Posts: 1,201
Not Ranked     
Default

Quote:
Originally Posted by Mark IV View Post
This is where we source our hardware. The variety of sizes and grip length make proper sizing possible. My 289 has the Salisbury diff with the Spicer "plunge" halfshafts and we were able to source all of the needed sized with quality AN washers at Spruce. 7000+ miles and I just checked all of the hardware and all have held proper torque.

Plus the pricing is very reasonable for the small quantity and in fact is cheaper than grade 8 stuff from the local hardware store: https://www.aircraftspruce.com/menus/ha/bolts.html
there are so many different types on the site I dont know what
to get. Please send me a link on what I should use for my half shafts. nuts bolts and washers... Thank You!!
Reply With Quote