[Blackbart]

My wipers have stopped working on ERA #804. I disconnected the terminal block at the motor and connected the motor to a 12V source battery. The motor works. I've checked for power at the terminal end. With the ignition on and the wiper switch in any of the positions, I do not get any power to the terminal block. The fuses are fine and I have been unable to get the switch out of the dash. (what tool works to remove a very tight trim ring?) The connections to the switch are all tight. I've tried to follow Bob's wiper motor check/trouble shooting guide but am still at a loss as to why no power at the motor.