[Andy Dunn]

one other thing to note is that a 1/4 threaded insert, requires a 3/8" hole. The holes are big compared to the end bolt size. One of the coolest uses for thread serts that I have seen, is the Crane Roller Lifter Retro Kit. They use two inserts in the block drain holes to mount the roller guide.

http://www.trickflow.com/articles/st...ss2_image1.htm

http://www.trickflow.com/articles/st...ss2_image2.htm

http://www.trickflow.com/articles/st...ss2_image4.htm

http://www.trickflow.com/articles/st...ss2_image5.htm