help me build a 460!

[mdross1]

Originally Posted by vector1

i'd put some big flowing heads & matching cam & carb on it, vizard & co. built a 500+ (?) chevy and showed 800hp+ on pump gas.

Just a little daydream.Already have a set of aluminum motorsport heads,Davinci 1000cfm dbl pmp,Tubular auto custom headers,would step up to a single plane manifold,and poke a solid roller in to make it all work.
It will be another year at least, building an all aluminum motor for V8 bike.

[shijing]

I have a spare 460 block and have thought about a stuffing a long arm between the pan rails.What kind of clearancing is required to swing a combo like this,and how bad does it make the rod angle?

[blykins]

Originally Posted by shijing

I have a spare 460 block and have thought about a stuffing a long arm between the pan rails.What kind of clearancing is required to swing a combo like this,and how bad does it make the rod angle?

It doesn't require any clearancing unless you go to a 4.500" stroke and then you *may* have to touch the block.

Don't worry about rod angles....