- -
Boss 9 Cobra
(
http://www.clubcobra.com/forums/429-460-engine-talk/122133-boss-9-cobra.html)
| PLDRIVE |
09-08-2013 10:45 AM |
Boss 9 Cobra
It would be nice if one of these would fit in a cobra. Is there a cobra it would fit in :confused: http://www.clubcobra.com/photopost/d.../IMG959850.jpg
Jim Kuntz sent me this picture. I thought u guys might like see something a little different. Its going in 55 ford truck. Its a hyd roller 10.5.1 512CI 750HP stump puller. |
| brettco |
09-08-2013 11:43 AM |
Quote:
Originally Posted by PLDRIVE
(Post 1261426)
It would be nice if one of these would fit in a cobra. Is there a cobra it would fit in :confused: http://www.clubcobra.com/photopost/d.../IMG959850.jpg
Jim Kuntz sent me this picture. I thought u guys might like see something a little different. Its going in 55 ford truck. Its a hyd roller 10.5.1 512CI 750HP stump puller.
|
Bring one over and it will fit in my Hi-Tech. |
| ERA Chas |
09-08-2013 12:31 PM |
What a waste of 750HP-a 55 truck...
|
| blykins |
09-08-2013 12:32 PM |
I doubt it will. They are physically larger than any DOHC modular Ford, and I know that they get tight.
Certainly are stump pullers though....last one I did, I dyno'd it at Jon's shop. 740 hp @ 6000, 700 lb-ft of torque. Little tiny hydraulic roller, pump gas. :)
|
| B.M.B.C |
09-08-2013 03:14 PM |
There is a FF5 somewhere with one shoehorned in!
|
| Bernica |
09-08-2013 03:18 PM |
They are bigger than an SOHC Cammer? 'Cause that's already been done....
|
| PLDRIVE |
09-08-2013 03:44 PM |
Quote:
Originally Posted by brettco
(Post 1261431)
Bring one over and it will fit in my Hi-Tech.
|
:LOL::LOL: I will get right on that!
Quote:
Originally Posted by ERA Chas
(Post 1261434)
What a waste of 750HP-a 55 truck...
|
I agree. i would prefer it in a 69 Mach 1. |
| RodKnock |
09-08-2013 04:29 PM |
Quote:
Originally Posted by ERA Chas
(Post 1261434)
What a waste of 750HP-a 55 truck...
|
Come on Chas, what's wrong with a pickem-up truck? You do know, they even have a race truck series. :D |
| Tom Wells |
09-08-2013 04:40 PM |
|
| ERA Chas |
09-08-2013 05:15 PM |
Quote:
Originally Posted by RodKnock
(Post 1261458)
Come on Chas, what's wrong with a pickem-up truck? You do know, they even have a race truck series. :D
|
That joke is NASCAR'S attention grab for the lowest of the redneck contingent. They ain't developing new talent by letting the 'Cup pros pad their salaries either. :rolleyes:
And tell me how a 55 pickup applies 750 HP to the pavement in other than possibly a straight line.
Just another 'look at me' project. :mad: |
| fordracing65 |
09-08-2013 05:19 PM |
Quote:
Originally Posted by ERA Chas
(Post 1261466)
That joke is NASCAR'S attention grab for the lowest of the redneck contingent. They ain't developing new talent by letting the 'Cup pros pad their salaries either. :rolleyes:
And tell me how a 55 pickup applies 750 HP to the pavement in other than possibly a straight line.
Just another 'look at me' project. :mad:
|
Kinda like a, Look at Me, girlfriend or wife, nothing wrong with that...:3DSMILE: |
| PLDRIVE |
09-08-2013 08:22 PM |
Quote:
Originally Posted by fordracing65
(Post 1261467)
Kinda like a, Look at Me, girlfriend or wife, nothing wrong with that...:3DSMILE:
|
Now thats funny:LOL::LOL::LOL: |
| Bernica |
09-08-2013 08:38 PM |
Quote:
Originally Posted by ERA Chas
(Post 1261466)
That joke is NASCAR'S attention grab for the lowest of the redneck contingent. They ain't developing new talent by letting the 'Cup pros pad their salaries either. :rolleyes:
And tell me how a 55 pickup applies 750 HP to the pavement in other than possibly a straight line.
Just another 'look at me' project. :mad:
|
Tried it once in my younger days with an old Ford pickup. Had a nice sideoiler on the stand and lost my truck's FE motor, so "what the hell?". I didn't have anywhere else to put it at the time! Plus, I lived in Washington State so lots of wet pavement, snow etc. So I had that going for me. Ended up piling the bed of the truck with sandbags and railroad ties so I could just keep it on the road.:eek: After a while, no one wanted to ride with me. Ah, the memories! |
| joyridin' |
09-09-2013 05:51 AM |
Quote:
Originally Posted by Bernica
(Post 1261502)
Tried it once in my younger days with an old Ford pickup. Had a nice sideoiler on the stand and lost my truck's FE motor, so "what the hell?". I didn't have anywhere else to put it at the time! Plus, I lived in Washington State so lots of wet pavement, snow etc. So I had that going for me. Ended up piling the bed of the truck with sandbags and railroad ties so I could just keep it on the road.:eek: After a while, no one wanted to ride with me. Ah, the memories!
|
Same here about 20 years ago. Had a 67 Chevy shortbed stepside with a twin turbo 454 and a 4 speed. It wasn't really bad off the line, but you could be driving along a 55 mph and mash the gas pedal and it would light up the 12" wide tires with ease. |
| xlr8tr |
09-11-2013 01:48 PM |
|
| mdross1 |
09-17-2013 04:44 AM |
Quote:
Originally Posted by ERA Chas
(Post 1261434)
What a waste of 750HP-a 55 truck...
|
Not to owner of the 55 pickup.A friend of mine has a motorcycle with near 1200hp. Certainly hurting for traction but a waste? All depends on who's looking I guess. |
| BossCER |
01-25-2014 03:46 PM |
Quote:
Originally Posted by B.M.B.C
(Post 1261445)
There is a FF5 somewhere with one shoehorned in!
|
Know where to find those pics? |
I would think the footwells would be so tight it might require amputation to drive.
|
| mdross1 |
03-15-2014 06:22 AM |
It has been done, it was my plan when building our car. At that time Boss engines or the parts to build one prices were out of sight. Once the Kaase Boss 9 parts became available reconsidered,in the end decided the 460 will have to do. Course now Kaase has the P-51 heads for the 460 the juices are flowing.
|
| MRGEORGE077 |
03-15-2014 07:04 PM |
Quote:
Originally Posted by ERA Chas
(Post 1261434)
What a waste of 750HP-a 55 truck...
|
Yep, but it sure will be a kick butt 55. :D |
| All times are GMT -7. The time now is 04:43 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
