I am currently having a problem keeping cams in my 460. This is a newly rebuilt motor that is going through a proper break in but is still wiping out cams (hydraulic). I need to check the angle of the lifter bore and there locations before I move forward. I need help finding this data.
Thanks Tom
Last edited by limebluie; 11-03-2002 at 08:17 AM..
Have the lifter bores bored and sleeved with bronze bushings, about $400.
__________________ Jeff
“If you can make black marks on a straight from the time you turn out of a corner until the braking point of the next turn, then you have enough horsepower.”
460 lifter bore angle dimension
Linear Mode
