05-16-2011, 06:26 AM
|
 |
CC Member
|
|
|
Join Date: Nov 2001
Location: Windham,,
Me
Cobra Make, Engine:
Posts: 1,590
|
|
Not Ranked
Always like to check in with big inch like minded Cobra owners.My aluminum head,hyd flat tappet,1000 cfm dbl pump 560hp ,460 inch has been a treat.Have a spare 460 sitting in the shop and always thought one day would throw in a big arm and get it out to at least 521" BUT! would it be enough? Honestly enjoy the car 99% of the time.What gets me thinking about the 500+inch arena is the rollons and just hammering it out on the highway where big inch really shines.Don't want so much torque that have to be wary of it in that situation.
So,I need to lean on you enthusiasts that have these big guns powering your Cobra's.
Not concerned about having too much cornering,just want to be able to hammer it at speed and stay somewhat hooked to the asphalt.Anybody willing to chime in and give me examples?
My car has been scaled and the diff also at 4 degrees positive,it hooks good off the line and stays very straight.
Mike Ross
Last edited by mdross1; 05-16-2011 at 06:29 AM..
|
2Likes
Threaded Mode
