Throttle cable connection to carb help

[mjmacqua]

Guys,

I am looking for a little help.

I am putting in my brand new 501, and I think I lost a pc to the linkage for the throttle cable to the linkage on the carb.

Does anyone know how to make this connection? Currently I have the cable in place but there doesnt seem to be a connection to the carb. I tried to find a picture of it, I believe it was a screw.

Please let me know...

Thanks Mike

[danc30]

Need detail if you want any suggestions.
Type of carb?
What kind of throttle cable?
what does the end of the cable have on it?

Here is a Lokar cable. It has the connectors on it.

[mjmacqua]

Here are the details:

4150 750CFM Holley

I am not sure what type of cable it is, but I have attached a pic of it. I really think it was a small screw, but I want this to be right.

[Jerry Clayton]

you need a throttle ball---Barry Grant/Demon number 124004 or 124005---1/4 stainless ball

[ratsnst1]

I take it you have the return springs you need as well.

[mjmacqua]

Originally Posted by Jerry Clayton

you need a throttle ball---Barry Grant/Demon number 124004 or 124005---1/4 stainless ball

Thanks, do you know where to get one?

[mjmacqua]

Originally Posted by ratsnst1

I take it you have the return springs you need as well.

Yes, just not connected right now.... Thank you

[mjmacqua]

Jerry,

I found them on Jegs.

Thanks for your help.

Mike