DC,
Not sure but I am checking everything. Couldn't see any problems w/ Edelbrock heads or block when I replace head gaskets. I am checking to see if the new manifold I replaced my 2X4 manifold with is not warped or pitted. This is a new problem I experienced since I swapped manifolds. I pressured up my radiator last night to see if I could spot a leak somewhere but I couldn't. Since there is no water in my
oil I am wondering if maybe the end of my manifold may be warped so that I am sucking water into my exhaust port. I really don't know what to look for to be honest. But I will finish the tear down tonight and re-examine everything.
Just love a good mystery!!!!!
