Ford 460+McLeod Modular Bell Housing+Top Loader?
Driveline does not require "C" shaped spacer. If spacer is used, tranny sits too far rearward in vehicle, tranny input shaft will not engage pilot bearing. Be CAREFUL!
Make sure to measure the stack up. . . the stock spacer is .500 and in some (mine) applications is too thick.
The correct spacer is: #8703-11 (1/4 " thick)
and the correct hollow dowels are: 8707-1 (2 required)
I will post again when all is re-assembled . . . in the mean time, all this info provided to me by Red at McLeod . . . Thanks Red, for pulling my onions out of the fire!!!
Kimba
