Hey Guys,
My 302 just arrived, and I have positioned it between my frame rails. I am looking at the directions from A&C about how to measure for the correct spacing. Now I am scratching my head.
1. The directions state: to measure back 22 1/2" from the backside of the 2x2" square tube cross member to the middle of the passenger side header pipes where they exit the body.
This would appear to be a diagonal measurement? As the tube is between the main rails, and the headers are outside the rails where they exit the body.
Any advice would be appreciated. I am want the headers to exit through the body in the correct place.
Jer