Jason greggs Jason I think you should look at the best qualified builders and not someone in your area. Fe motors are not a motor that ever TOM,DICK, and HARRY can build. I think you would need to look hard at Gessford Machine, KCR, and Mike lefevers. I would also looks a Master fe builder Joe Boghosian in Cali. He has over 40 years of FE building. There are someothers out there Kuntzs with many years. You get what you pay for, remember that
. There are a couple of others that are up and comers for building motors but time will tell. You didn't say what size motor, alum or iron, what you are going to do with your car and motor?? You have a few questions to figure out.
Good luck with your car. Rick Lake Ps. not to push you in any direction but George A at Gessford was machinist of the industry last year. I know that KRC has many 1/4 mile records for drag racing. Kuntz is the same. Mike started with shelby and got the alum block off the ground and manufactored. The engineering is tops. Ask anyone with a shelby block how they like it. I know it has had a couple of small problems but they have been worked out.