I found what I wanted manufactured by Dana Corp. It's called WeatherHead, trademark WH. Used it with brass fittings on the
oil lines and fuel line from the fuel log to the holley. Look at my photo gallery. There is also some new stuff out there by Aeroquip, with a flame resistant covering, nice looking hose. Did not find Goodyear anywhere. Used the 5/16" braided hose for the fuel lines, fuel log to Holley,also available in 3/8". The
oil lines are 5/8" I think with push lock AN connections, size AN8, some folks use AN10 on the
oil lines. The size 8 is pretty much the same size as 5/8" heater hose. Good luck.