wrench87 Canton t pan with there windage tray and pickup is a good way to go. The other way is a drysump system. I have a canton t-pan and windage tray on my motor. Make sure that the rotating assembly clears the windage tray. I had to adjust mine to clear a couple of rod bolts from hitting the tray.I would also a 1 extra quart of
oil to the motor to help with
oil starvation when hard turning or driving. I run 2 quarts with the
oil cooler and lines in my car. I had no problems yet, I get a small leak from the rear main seal. I can live with it. I am just marking my space
Rick L