10-23-2007, 10:59 AM
|
|
CC Member
|
|
|
Join Date: Mar 2001
Location: E BRUNSWICK N.J. USA,
Posts: 3,841
|
|
Not Ranked
Canton pan, pickup, and windage tray.
wrench87 Canton t pan with there windage tray and pickup is a good way to go. The other way is a drysump system. I have a canton t-pan and windage tray on my motor. Make sure that the rotating assembly clears the windage tray. I had to adjust mine to clear a couple of rod bolts from hitting the tray.I would also a 1 extra quart of oil to the motor to help with oil starvation when hard turning or driving. I run 2 quarts with the oil cooler and lines in my car. I had no problems yet, I get a small leak from the rear main seal. I can live with it. I am just marking my space   Rick L |
Threaded Mode
