Atlanta fuel/oil line supplier?

ToyCollector · #1 (**permalink**) 07-30-2003, 11:48 AM

Any of you know of a good place I can go to to get different fuel and oil lines, and various t-fittings, etc? This is one of those things I want to check out in person, rather than order over the internet or via phone. Also, I need to punch about a 1/2 inch to 3/4 inch howl in my cowl--any recommendations on what would make the cleanest burr free hole?

GeorgiaSnake · #2 (**permalink**) 07-30-2003, 12:37 PM

You need a howl in your cowl - I would suggest a high quality howl saw.

Call Cracker I gave him the name of a place and now I can't remember it. CRS here.

Randy

ToyCollector · #3 (**permalink**) 07-30-2003, 01:24 PM

Happy you liked the spelling

Not good to multi-task

.

Joe Brett · #4 (**permalink**) 07-30-2003, 02:37 PM

Try Barnett.
Been there once with a friend and they probably have what you need. South part of downtown.

Tony Radford · #5 (**permalink**) 07-30-2003, 07:15 PM

Mike, Joe is right. I looked in my Barnett Performance catalog. They've got every fitting imaginable. You'll need a catalog to navigate their inventory. Their web site is a bit unsophisticated. The number is 800 533-1320. I've bought several things from them. They keep a pretty decent inventory in town and a good showroom.

GeorgiaSnake · #6 (**permalink**) 07-30-2003, 08:47 PM

Essexs Parts north of Alpahretta right off Hwy 9.

ToyCollector · #7 (**permalink**) 07-30-2003, 08:55 PM

Got all of them. Thank you guys. Sad thing is I have gotten parts from Essex (brake pads), and Barnett last week (shifter that Bill P ordered for the street rod), and, duh, never thought of them for this stuff.

Tony Radford · #8 (**permalink**) 07-31-2003, 03:52 AM

Toy Joy Overload (TJO). I've heard of this before.

GeorgiaSnake · #9 (**permalink**) 07-31-2003, 04:02 AM

TJO

Alex Donghi · #10 (**permalink**) 07-31-2003, 04:15 PM

Mike
I have a set of hole punches used for aluminum electronic chassis. What size hole do you need to make and I'll check if i have the size. These make very clean cuts. You DON"T want to use a drill. If I don't have the correct size Home Depot I think sells these in their electrical specialty section were they sell volt meters etc. They are made by Greenlee or Greely I can't remember but Ill look tonite for the name. I can bring them up to Alpharetta meat you for lunch or something My cell404-310-0823

Alex Donghi · #11 (**permalink**) 07-31-2003, 04:19 PM

Duh
I just reread your message above. Im pretty sure I have those sizes. I'm heading home in a few give me a buzz

ToyCollector · #12 (**permalink**) 07-31-2003, 04:21 PM

Went to Essex, they did not have what I needed. Went to BCI, and essentially walked out with everything I needed. I should have dry fit the fuel guage, two lines, and isolator before I left there. One of the line couplings is the wrong size. Need to head back there for a fuel line adaptor. Oh well.....

Alex, appreciate the offer and that sounds like the way to go. I have a HD right around the corner and if they don't have it, I'll give you a call.

GeorgiaSnake · #13 (**permalink**) 07-31-2003, 04:35 PM

Mike the hole (howl to some) punch works great if you can get a wrench on it.

If you haven't gone to HD yet ask them about the 220 circuit, I think they will fix you up and I'll help you install it.

Randy

ToyCollector · #14 (**permalink**) 07-31-2003, 07:09 PM

Got the 220 stuff tonight, just need to exchange breakers due to physical size. Wiring is easy (I think), it will be the running of cable behind wall that I need you on. Sent you email.