Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   289FIA Dimpled Trunk Lid (http://www.clubcobra.com/forums/all-cobra-talk/101450-289fia-dimpled-trunk-lid.html)

bdeutsch 12-12-2009 12:20 PM

289FIA Dimpled Trunk Lid
 
Just noticed a very nice Contemporary Motorworks 289FIA for sale and saw that it had the proper dimpled trunk lid that duplicates how the originals were configured.

Two questions:

1. Is Contemporary Motorworks still in business? Tried to find their web site and came up with nothing.
2. Do any of the other manufacturers of the 289FIA body style duplicate the dimpled trunk lid? I've looked at Shelby CSX 7000, Kirkham and I think ERA, and do not remember seeing it (at least if I am remembering correctly).

As always, appreciate members response.

Bob

smallblockhead 12-12-2009 12:30 PM

ERA's 289 FIA can be ordered with plain or dimpled trunk.

Gary

Ozgur_Tan 12-12-2009 12:30 PM

hi
1. no
2. yes, most of the manufacturer of 289fia's duplicate dimples.
but, i don't like those dimples and i've got smooth trunk on my scratch build 289 !
regards
ozgur

rustyBob 12-12-2009 12:31 PM

E.r.a. 1-860-224-0253

tkb289 12-12-2009 12:31 PM

Bob,

ERA does offer their 289 FIA with the trunk dimples ... see the link below.


http://www.erareplicas.com/differ/index.htm


- Tim

*13* 12-12-2009 12:41 PM

Mine has dimples. The ERA dimples are cast into the lid. Some dimples are actually glasses on to a smooth lid. Not a deal breaker to most, but nice to know none the less...

Contemporary has long since been outta business. They made a nice car. A lot of the quality depends on the builder though.

My ERA Dimples
http://www.clubcobra.com/photopost/d...m/DSC06778.JPG

1985 CCX 12-12-2009 01:13 PM

Contemporary has been gone for decade however they have a strong following in the forum section of this site.
http://www.clubcobra.com/forums/contemporary-classic-forums/
Nice thing about CCX is they are a great design with round tubular frame. However their 289 used the 4" tube like the 427 and not the 3" as original.

This car was built by John McMahon NJ.

Tom Kirkham 12-12-2009 10:43 PM

Quote:

Originally Posted by bdeutsch (Post 1009275)
...289FIA...it had the proper dimpled trunk lid that duplicates how the originals were configured... Bob

The first FIA car did not have dimples in the trunk while it was being raced by Shelby American. See Cobra Ferrari Wars by Mike Shoen.

The other cut back door cars (USRRC for example) did not have dimples in the trunk.

The trunk dimples are ugly. :eek:

James Stern 12-13-2009 07:11 AM

Like zits on a supermodels butt?:LOL:

mrmustang 12-13-2009 07:17 AM

Quote:

Originally Posted by 1985 CCX (Post 1009296)
This car was built by John McMahon NJ.

And the attention to detail and the quality of parts used by John were second to none. If you want John's old car you better hurry, as I've dropped the price on both of my Cobra replicas in the hopes that they sell quickly so I can buy it. I missed my chance once, really do not want to miss it again. For those out looking at John's old car, the detail shots can be found by CLICKING HERE



Bill S.

*13* 12-13-2009 07:24 AM

They are too! Kinda like Glasses on a hot school teacher!:D
Quote:

Originally Posted by Tom Kirkham (Post 1009401)

The trunk dimples are ugly. :eek:


mr bruce 12-13-2009 07:29 AM

here's sum dimples on a lid from a body I make to fit on an F5 frame. http://www.clubcobra.com/classifieds...e=SDC11588.JPG

mk2gt40 12-13-2009 07:31 AM

To me gorgeous! One of the few things that make them stand out from the hordes parked at the show.
But then I`ve always enjoyed the Business look on woman!

*13* 12-13-2009 07:35 AM

Dimples on the trunk lid, Cut Back doors, More abrupt fender flares, Frowny snout, speedo on the wrong side, ugly & intrusive roll bar are all some of the strange things that make the FIA car so cool!

John McMahon 12-13-2009 08:47 AM

Quote:

Originally Posted by mrmustang (Post 1009425)
And the attention to detail and the quality of parts used by John were second to none. If you want John's old car you better hurry, as I've dropped the price on both of my Cobra replicas in the hopes that they sell quickly so I can buy it. I missed my chance once, really do not want to miss it again. For those out looking at John's old car, the detail shots can be found by CLICKING HERE

Bill S.

Bill,

Thanks for the props! Lots of blood, sweat and tears in that build. It was tough to finish it because of all the time I was spending at the track with the Mustang.

I know you left your DNA on the car when I wasn't looking! :D:D:D

Here is a nice shot of the rear....the dimples aren't as pronounced on the Contemporary....

http://www.cobranet.com/coppermine/a...s/IMG_1246.JPG

I'm almost tempted to buy it back myself!:CRY:

mrmustang 12-13-2009 08:53 AM

Quote:

Originally Posted by John McMahon (Post 1009442)
Bill,

I know you left your DNA on the car when I wasn't looking! :D:D:D


Ah yes, but just like with your 95 "R" Model you'll never know just where ;)



Bill S.

John McMahon 12-13-2009 09:13 AM

Quote:

Originally Posted by mrmustang (Post 1009445)
Ah yes, but just like with your 95 "R" Model you'll never know just where ;)



Bill S.

http://www.popartuk.com/g/l/lgmp0163...ini-poster.jpg

bdeutsch 12-13-2009 09:42 AM

Thanks for the Response
 
As always, appreciate members response and images.

In regards to the asthetics of the dimples, can only say that varied opinions are just that...varied opinions. I personally do not think the side pipes on the 427SC are asthetically pleasing or practical from one perspective (snake bite thinking here), but still love their sound and practicality (from another perspective) of getting the exhaust a bit further off the ground.

CobraDan 12-14-2009 07:49 AM

http://www.uniquemotorcars.com/images/000_0061.jpg

Here Unique has a dimpled trunk lid with a reverse hinge to allow entrance to the trunk because of the Lemans hard top.

Got the Bug 12-14-2009 09:57 AM

Quote:

Originally Posted by CobraDan (Post 1009608)
http://www.uniquemotorcars.com/images/000_0061.jpg

Here Unique has a dimpled trunk lid with a reverse hinge to allow entrance to the trunk because of the Lemans hard top.

The top, along with dimpled trunk looks awesome Dan!


All times are GMT -7. The time now is 02:12 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: