Seat Belt / Harness upgrade

[DANGER]

I know the upper frame rail is stronger than the seat bracket. I would contact your dealer, although mine wasn't very helpful... Superformance was very helpful and told me exactly where to look for the pre-drill / slit mounts. Does Hi-Tech still make the rollers for Shelby??

You could check by just removing the rear tires they might have them already drilled..

I would not feel safe having someone ride with a floor mounted shoulder harness.

Just my .2 cents..

[twobjshelbys]

Originally Posted by DANGER

I know the upper frame rail is stronger than the seat bracket. I would contact your dealer, although mine wasn't very helpful... Superformance was very helpful and told me exactly where to look for the pre-drill / slit mounts. Does Hi-Tech still make the rollers for Shelby??

You could check by just removing the rear tires they might have them already drilled..

I would not feel safe having someone ride with a floor mounted shoulder harness.

Just my .2 cents..

This is a HST manufactured carbon fiber roller. I still need to email Tony at SA.

Can you post a pic of where the access is? I've had the tires off and didn't see anything but then I wasn't necessarily looking for it.