Club Cobra Keith Craft Racing  

Go Back   Club Cobra > Cobra Talk Areas > ALL COBRA TALK

Keith Craft Racing
Nevada Classics
Keith Craft Racing
Main Menu
Module Jump:
Nevada Classics
Nevada Classics
MMG Superformance
MMG Superformance
Advertise at CC
Banner Ad Rates
Keith Craft Racing
MMG Superformance
Keith Craft Racing
November 2025
S M T W T F S
            1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30            
  #1 (permalink)  
Old 08-22-2010, 06:50 PM
CC Member
Visit my Photo Gallery

 
Join Date: Dec 2002
Cobra Make, Engine: KMP
Posts: 790
Not Ranked     
Default

Epoxy will bubble/peel if there is no moisture barrier under the concrete. To check, tape a 1'X1' piece of Saran Wrap on all sides to the floor for a week or so. If there is any fog or condensation, then you don't have a moisture barrier and the epoxy will lift. Also, concrete takes a LONG time to fully cure (6 months, a year maybe?) and if it isn't fully cured and epoxy is applied, it will lift.

Race Deck is nice, water will flow under it, it can be kept clean easily (although epoxy sweeps up better with less effort) and it isn't slippery. When it is extremely hot for long period of time, Race Deck can buckle very slightly. It is easy to install and is removable, which is a place. It is very durable.
__________________
Lew

I'm no expert.
  #2 (permalink)  
Old 08-22-2010, 10:09 PM
thudmaster's Avatar
Regularly Offensive
Visit my Photo Gallery

 
Join Date: Feb 2006
Location: yuba city, ca
Cobra Make, Engine: spf
Posts: 1,231
Not Ranked     
Default

I used roll out rubber mat. Two twenty foot rolls. I wish I had not bought the ribbed one though. Tough on the knees. Install time about two hours if you have a friend.





I know its not racedeck or paint but it sure is easy to clean.
__________________
Ed

Too close for missles, switching to guns.........

Last edited by thudmaster; 08-23-2010 at 02:33 AM..
  #3 (permalink)  
Old 08-23-2010, 03:08 AM
pablo63's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: Jan 2010
Cobra Make, Engine:
Posts: 81
Not Ranked     
Default

Quote:
Originally Posted by thudmaster View Post
I used roll out rubber mat. Two twenty foot rolls. I wish I had not bought the ribbed one though. Tough on the knees. Install time about two hours if you have a friend.





I know its not racedeck or paint but it sure is easy to clean.
Looks good. Where did you purchase? Cost?
  #4 (permalink)  
Old 08-23-2010, 06:35 AM
FUNFER2's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: Oct 2002
Location: Eagle, Ne.
Cobra Make, Engine: 1966 Lone Star 427SC.
Posts: 4,310
Not Ranked     
Default

If you like the plastic tiles, I can still get a great price from "Swisstrax". Best tiles out there & the best warranty.

http://www.swisstrax.com/
__________________
Regards,
Kevin
  #5 (permalink)  
Old 08-23-2010, 02:06 PM
mkassab's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: Mar 2010
Location: Navarre, FL
Cobra Make, Engine: Unique 427 S/C, 427ci
Posts: 166
Not Ranked     
Default

2 part latex epoxy with clear coat.... been there for 5 years in the hot south.... no sitck/lift from tires. The key is prep, dry mositure free concrete and no dust. With the latex opion..... less worry with not perfect dry concrete. And a must.... no green new concrete. I'd think at least a year old? Here's my pict's below

Mark
Attached Images
    
__________________
Unique 427 S/C, B2 Motorsports 427ci SBF, TKO600, Jag IRS 3.73 Posi, Avon Tires.... and so much more http://www.uniquecobra.com/forums/forumdisplay.php?f=68

Last edited by mkassab; 08-23-2010 at 02:09 PM..
  #6 (permalink)  
Old 08-23-2010, 02:51 PM
RaceDeck's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: May 2001
Location: Salt Lake City, UT
Cobra Make, Engine: "ORIGINAL" Kirkham #302-Stainless Steel Chassis w/Billet suspension -427 Shelby Aluminum block stroker 495ci by Kinetics Race Engines
Posts: 415
Not Ranked     
Default

If you have any questions on your particular garage set & needs up just give us a call ... and remember, all CC members get deal$
__________________
Jorgen Moller
Founder/Inventor
RaceDeck Garage Flooring
800-457-0174
All CC Members Get Discounts
[b]http://www.racedeck.com


Life Member of the Bonneville 200 mph Club


05' Ford GT- Retune , Pulley & Exhaust 650+hp
Superformance GT40 MK2
63.5 Falcon Sprint ' Voodoo Falcon' GT350R powered
93 Ford Escort RS Cosworth FIA Rally Car
  #7 (permalink)  
Old 08-23-2010, 03:10 PM
CobraEd's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: May 2000
Location: Northern VA, VA
Cobra Make, Engine: Classic Roadsters
Posts: 2,765
Not Ranked     
Default Racedeck

I am constantly working in the garage on my cars and my kids cars. So if I went to Racedeck and I was always jacking up cars (like my 4,000lb Caddys), I would not really perminantly dent the tiles ??????


.
__________________
LIFE IS TOO SHORT TO WORRY ABOUT GOOD GAS MILEAGE
________
Utinam logica falsa tuam philosophiam totam suffodiant!
________
  #8 (permalink)  
Old 08-30-2010, 10:49 PM
Bud K's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: Mar 2010
Location: Tucson, az
Cobra Make, Engine: FFR Mk II
Posts: 17
Not Ranked     
Default

I had epoxy put down on my garage floor. Looks great, oil cleans up nicely, however, rebuilding a car will definitely take a toll on the finish. Moving my car around on wheel dollys became a problem when I ran over a small rock. The rock cut through the epoxy. Also, a car with hot (Tucson heat) sticky tires can lift up the finish, even if applied by a professional.

Bud K
__________________
Bud K

www.thepipesarehot.com
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 04:28 AM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: CC Policy
Links monetized by VigLink