
05-26-2010, 03:26 PM
|
 |
CC Member
|
|
|
Join Date: May 2001
Posts: 1,330
|
|
Not Ranked
Here are the instructions I've followed with great success;
1. Remove any wax from the applicant area
2. Wipe down with a lint free cloth
3. Take a spay bottle and add a drop or two of dish washing liquid and fill with water.
4. Lightly spray both the car and back-side of the decal with the water solution and apply.
5. Position to your desired location and while holding, squeegee from the center to the outside until all bubbles are removed. Use a rubber or soft plastic squeegee. Credit card works fine.
6. Wipe up your mess
7. Have a fine scotsh or bourbon and admire your masterpiece. If it doesn't look good, repeat this step.
8. LET DRY OVERNIGHT
9. Re-wax or better, show-shine lightly to clean it up.
They will stick like glue.
Last edited by TButtrick; 05-26-2010 at 03:28 PM..
|