Engine Info for New Member

[mkassab]

Originally Posted by FredBMOC

Hi everyone!
I have been reading through the forum for the past few days about the different manufacturers, engines, options, etc ;however I would still like some clarification as far as all the different engine options available for Cobras from 427s to modern FI Aluminum engines. Pros and Cons of each? I tried to find an FAQ or sticky with all of this info summarized but simply could not find it.

Thanks,

Fred in Florida

Fred.... when you have 30 min's.... call Brent Lykins, B2 Motorsports.... @ 502-759-7431. He built my engine (I also bought my TKO trans, clutch, etc from Brent). One of the best decisions I ever made. Brent will spend the time with you.... lots of Q&A and make several recommendations depending on what you want to do with the car. Check my build site for more info... http://www.uniquecobra.com/forums/forumdisplay.php?f=68 He knows his “stuff” and is not biased in any way (except he hates GM engines ), and is very passionate about what he does. He spent countless hours with me over the build period. Can’t put a value on customer service like that!!

Mark