460 ALT/PS brackets

imfastrnu2 · #1 (**permalink**) 09-23-2010, 03:19 PM

i'm looking for a good set of brackets to mount both alternator and power steering pump to my 460 in a Midstates Cobra. I have the alternator on the driver side already and would love to find a bracket to mount the power steering pump on the passenger side. i could switch sides if necessary, but I'd prefer to leave the alternator where it's at so I don't have to lengthen my wires. Does anyone have any good sources for brackets?

Thanks.

sspano01 · #2 (**permalink**) 10-31-2010, 05:44 PM

im probably going to wind up making one for my A&C. I have the 460 and March pully setup. The alternator fits fine, but the P.S. pump hits the frame if I use their standard brackets. It uses a saginaw P.S. pump

Tom Wells · #3 (**permalink**) 11-01-2010, 06:33 AM

imfastrnu2,

Here's mine (Ignore the red arrow; that's the dipstick location):

I know they're reversed from what you have, but it's the only one I have.

If you do this, make the pivot point for the belt adjustment for the PS pump different than shown - mine has very limited adjustment range.

Tom

CobraDan · #4 (**permalink**) 11-02-2010, 02:52 PM