Underhood mirror-finish panel

[FWB]

there is acrylic mirror available, but it shows max temp is 200 deg F. might not last.

the only other choice is what was already posted #8 polish 304 stainless.
but if you actually check current stainless prices you might want to give up on having this.

the material before you cut it to fit will probably be in the 1000 dollar range

[GoMangoMan]

Originally Posted by FWB

there is acrylic mirror available, but it shows max temp is 200 deg F. might not last.

the only other choice is what was already posted #8 polish 304 stainless.
but if you actually check current stainless prices you might want to give up on having this.

the material before you cut it to fit will probably be in the 1000 dollar range

Ouch! $400.00 doesn't sound too bad but $1000.00? That's way too much!

[FWB]

in the past 2 years buying any kind of metal has gone up over 200 %

at our shop i only hold a quote for a machining customer for 7 days before i insist on re quoting. buying metal has become silly for us.