|
Excalibur bumpers on ebay
Early model full width hoop bumper set on ebay item number: 320326044394. No bids at $175 plus $22 shipping. Ends six days, Milwaukee (who would have thought!)
|
Windshield frame to top frame studs.
I received email concerning a source of the small T shaped studs that fit into the channel at the top of the windshiels to provide studs for the top front frame to grip. I have no way to verify the reliability or quality of the parts, but it seems like a good bet.
"A car owner came to me to have soft top\windshield t-nuts manufactured. I copied a factory sample, made engineering drawings and produced them for him in stainless steel. If any of the owners you know needs these do-dads, I offer packs of 10 for 145.00, I make them when ordered so turn around is usually 2-3 weeks. thanks. -- Fred W. Bentelspacher Origin Corporation 114 Riverview Dr. Treichlers PA 18086 610-767-9139 http://www.origincorp.net/" Mike |
Mike
I noticed that you are trying capture all the excalibur VIN's. I just bought a 95 and want to know what to do to get on the list and are there any good sites that I can buy some small needed parts...... |
Excalibur Owners and Parts
Sent you an email with info attached. Post up if you didn't get it. Welcome to this tread. It has helped some us keep better in touch and gain new contacts.
Mike |
Excalibur cobra 105 on ebay
105 is on ebay out of Oklahoma City. Last sold in 2007 from Odessa, Texas. Red/black interior. Has been converted to carb with NOS. 10K miles. Looks very nice. Item 320337728240 ends Feb 14.
Sold for $31,000. New owner, please respond and welcome- great car at a well bought price! Mike |
|
|
Cobra- Cobra
Tom,
Looks great. Where was this taken? Mike |
Cobra - Cobra
The "Cobra - Cobra" picture was taken in North Lake, Wisconsin about a mile from my old house. I've since moved into the city.
Inscription on the Cobra: "God is my co-pilot" |
I think that pretty much applies to either Cobra.
Mike |
I posted an 95 Excalibur Cobra on Ebay. I have enjoyed the vehicle but have no time. It was a rare one that had tubular A-arms and some other extras. I had a body off restoration done a few years ago and had it painted Porsche grey metallic with black stripes. My restoration guy made many improvements to how the body was bonded to the subframe to prevent long term cracking. Noise abatement insulation throughout the floor of the car and in the doors. The car has been made more modern with some accents and the brakes were upgraded substantially. Car is a really good street/show quality vehicle. If anyone is looking for a good Excalibur, this one is it.
Regards, Brian bskeefer@gmail.com |
Brian,
How about a link so we can take a look. Better hurry. I'm spending my money as fast as I can before I go broke! |
Ebay, 154, yellow/black, 5000 miles by original So. Cal. owner/dealer. Relisted May 18, item 200343490306.
Mike |
Clutch Cable part #?
Anybody know the MFG & Part # for a clutch cable with the adjustable rod on the end??
Mine just snapped! |
Hi Tom,
The clutch cable is from a 1988 Mustang GT, NAPA part # 615-1008. Hope this helps. Doug |
Thanks Doug... That's the right one: it has the eyelet on the pedal end and the adjustable threaded rod on clutch fork end.
|
I need a windsheild for my Excalibur #028 . does anyone no how still makes them. thanks daddy-o
|
HI
I have a 94 excalibur cobra 302. My last three vin numbers are 028, i dont know if that does you any good but i hope it does! daddy-o |
Windshield
daddy-o,
I believe it uses the same one as most kits and same as original Shelby Cobras. Finish Line has them. I think you can get it complete or just glass. Several of the kit manufacturer will sell them as well. Seems like Shell Valley is one, but make sure it is the common one most use. I understand it is tricky to replace the the glass in this frame as they often crack afterwards. You might want to contact Double Venom (Ed Combs) on the Classic Roadster forum on this site as he builds those cars from scratch and has decades of experience. You could give him a call if you'd rather at 740-852-5280. I am very convinced that the CR II and Excalibur windshields are identical fitment. Here is the glass info sent to me by Aloys in Germany when he had to replace his: XXX Triplex Laminated DOT 17-M101-AS1 E11 43 R-0076 Pilkington Made in England I have a registry of these cars and owners as well as info on parts sources and repairs. Contact me at mduke8@gmail.com and I'll send you what I have. I'd also like to know more about yours to add to the list. Mike |
Ex on Ebay
New entry on E bay for 96 Excalibur. Silver and very nice.
|
| All times are GMT -7. The time now is 02:07 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: