Here is the specific info from Bob Bennett on his jig welded headers and side pipes for the Excalibur Cobra:
Here is what we are offering;
Headers
1 5/8' primary tubes, 16ga flanged to match your port design header to side-pipe gasket set
Side-pipes
O2 bungs welded in (not required with Carburated cars)
O2 18" extension cords supplied to wire in (not required with carburated cars)
14ga bracket welded in place to match Excalibur mount
welds blended smooth
Pricing
Complete package-plain, ready to paint and install
$2,763.92 crated and ready to ship
Complete package-Polished Ceramic Chrome, with Ceramic Race Glaze on inside of Headers
$3,679.92 crated and ready to ship
Payment and Placing an Order
$2,000.00 deposit. Half of balance due on Ceramic Chrome Package when they are shipped to Ceramic Coating Facility. Balance plus shipping due when package is ready to ship.
We need to know which cylinder heads you are using when you place the order, so we can match the header flange to the exhaust ports.
We have also tooled up to make just the side-pipes for Excaliburs. They have different angles and lengths than the header/side-pipe package and are for use with the original Excalibur exhaust system. These are available for about $1700 raw, plus crating and shipping and any ceramic coating you may want.
Note: Other colors are available for the Ceramic Coatings, call for specific pricing.
Thank You for your interest.
Best Regards,
Bob Bennett
Bennett Coachworks LLC
1500 N. 4th Street
Milwaukee, Wisconsin
53212
414.298.2068 shop
Milwaukee WI Hot Rod Builders | Auto Restoration Services | Vehicle Updating | Bennett Coachworks
Mike
8Likes
Threaded Mode
